Annnnd... SAFE!
Proper shoes, safety glasses, hearing protection, and a mask are examples of...
PPE
Which tool should be used to remove an oil filter?
Oil filter wrench
When changing engine oil, what should the temperature of the engine be?
Over torqueing lug nuts can cause what?
Damage to wheel studs
Which battery terminal should you take off of the battery first when disconnecting the battery from the vehicle?
What do the yellow lines on a shop floor indicate?
Caution
Which tool should be used along with a hammer to cut a rounded-off nut on a vehicle?
Chisel
What part is the cylinder head bolted to?
Engine block
Where is the red brake warning light on a vehicle?
In the dash
How many connections are required when jump-starting a vehicle using jumper cables?
4
Eye protection that should be worn when working with chemicals
Safety Goggles
When a bolt or a nut is too tight to loosen with the socket currently being used, what is the safest solution?
Use a larger drive size
What color is associated with Diesel Exhaust Fluid?
Blue
Which type of brake fluid is synthetic?
DOT 5
What supplies voltage to the vehicle while the engine is running?
Alternator
What is an acceptable lifiting point on a vehicle without a frame?
Pinchweld
Which tool is used to remove snap rings?
Snap-ring pliers
Which part controls the flow of coolant through an engine?
Thermostat
Which part of the drum brake assembly pushes outward against the drum to slow the vehicle?
Which component is designed to protect the circuit in case of a short?
Fuse
What is the deadly gas that poses a threat if a vehicle is running and the shop is not vented?
Carbon Monoxide
Which metric socket would be about the same as a standard 1/2" socket?
13mm
Which part is used to keep the engine valves closed?
Where would one most likely find the master cylinder on a vehicle?
Under the hood, in front of the brake pedal
Which color is the high voltage wire harness in a hybrid vehicle?
Orange