This is what the acronym A.S.E. stands for
What is Automotive Service Excellence?
The most commonly used and versatile socket handle is a: a. ratchet b. flex bar c. breaker bar d.speed handle
What is answer "a" - ratchet?
Tech A says that shop air pressure is 100-150 PSI. Tech B says that it is around 300 PSI. This technician is correct.
Who is Tech A?
This can be caused by breathing toxic substances.
What is asphyxiation?
Specs are: a. dimensions of parts b. maximum wear limits of parts c. measurements of specific parts d. all of the above
What is answer "d" - all of the above.
A technician who is an expert in one or more automobile systems
What is a specialized technician?
This wrench is best for a partially rounded off bolt. a. open end b. 6-point box end c. 12 point box end d. None of the above
What is answer "b" - 6-point box end?
Impact sockets for power tools are this color.
What is black?
This substance has been linked to lung cancer and used to be used in brake and clutch linings.
What is asbestos?
A dial indicator measures parts in: a. kilopacals b. milimeters c. hundredths of an inch d. thousandths of an inch
What is answer "d" - thousandths of an inch
A technician who is working and learning under the instruction of an experienced technician
What is an apprentice technician?
This is not a use for pliers. a. cut b. grip c. bend d. screw
What is answer "d" - screw.
These devices are used to support a vehicle while working under it.
What are Jack stands?
(Pulling or pushing) on a wrench is considered safer.
What is pulling?
Volume can be measured in all of these except: a. liters b. quarts c. kilopascals d. cubic inches
What is answer "c" - kilopascals
All of the following are benefits of ASE certification except:
a. recognition b. a sleeve patch c. a pay raise d. a wall certificate
What is answer "c" - pay raise?
This is not a common socket drive size. a. 1/4" b. 3/8" c. 5/8" d 1/2"
What is answer "c" - 5/8".
This is not a commonly used air tool. a. impact wrench b. air pliers c. air chisel d. air ratchet
What is answer "b" - air pliers.
True or false: Car batteries can explode.
What is True?
A micrometer is used for the following measurement. a. pressure b. temperature c. speed d. none of the above
What is answer "d" - none of the above
If you pass 8 ASE Automobile tests, you are referred to as this.
What "Master Automobile Technician"?
An adapter that lets the socket wrench turn at an angle.
What is a swivel or universal joint?
A hydraulic press can use this to generate pressure. a. air b. steam c. pump d. both a & c
What is answer "d" - both a & c?
Of the following, this is not true. a. store gas in approved containers b. keep gas away from sources of heat c. use quick dry to absorb any gas spills d. never use gas as a cleaning solvent.
What is answer "c" - use quick dry to absorb any gas spills?
This gauge is used to measure small clearances between two parts. a. telescoping gauge b. feeler gauge c. spring gauge d none of the above
What is answer "b" - feeler gauge.