Safety First
Camera Ops
Lights, Camera, Audio
Production Phases
Legal & Ethics
Tech Connections
100

What should you do before using any production equipment?

A. Wait for someone else to inspect it first

B. Only check equipment if it is new

C. Just turn it on and start using it immediately

D. Inspect it for damage and review safe operating procedures

D. Inspect it for damage and review safe operating procedures

100

Which camera angle is achieved by positioning the camera below the subject and looking upward?

A. Low angle

B. Dutch angle

C. High angle

D. Bird’s-eye view

A. Low angle

100

Which microphone pickup pattern records sound primarily from the front of the microphone?

A. Cardioid

B. Omnidirectional

C. Figure-eight

D. Bidirectional

A. Cardioid

100

What is the correct order of the production process phases?

A. Production, pre-production, post-production

B. Production, post-production, pre-production

C. Pre-production, production, post-production

D. Post-production, production, pre-production

C. Pre-production, production, post-production

100

Which Constitutional amendment protects freedom of the press and impacts A/V production?

A. First Amendment

B. Fourth Amendment

C. Second Amendment

D. Fifth Amendment

A. First Amendment

100

What is an input on A/V equipment?

A. The power connection for the device

B. The buttons used to control the device

C. A connection that receives signals into the device

D. A connection that sends signals out of the device

C. A connection that receives signals into the device

200

Which organization publishes safety rules that A/V production professionals must follow?

A. Copyright Office

B. FCC (Federal Communications Commission)

C. OSHA (Occupational Safety and Health Administration)

D. NAB (National Association of Broadcasters)

C. OSHA

200

What camera setting must be adjusted to ensure colors appear accurate in different lighting conditions?

A. White balance

B. Frame rate

C. Focal length

D. Aperture

A. White balance

200

What type of cable is commonly used to connect microphones to cameras or audio equipment?

A. XLR cable

B. Ethernet cable

C. USB cable

D. HDMI cable

A. XLR cable

200

During pre-production, which document outlines what will be said and shown in the video?

A. Budget

B. Production schedule

C. Script

D. Talent release

C. Script

200

What legal document must be signed by people appearing in a video to grant permission to use their image?

A. Copyright agreement

B. Talent release

C. Property release

D. Production schedule

B. Talent release

200

What is an output on A/V equipment?

A. A connection that receives signals into the device

B. A connection that sends signals out of the device

C. Where files are saved on the device

D. The screen that shows what is being recorded

B. A connection that sends signals out of the device

300

What is the primary safety difference between working in a studio versus working in the field?

A. Studios do not require any safety considerations

B. Field locations require additional hazard assessments for changing environments

C. Equipment safety only matters in the studio

D. Field work is always safer because there is more space

B. Field locations require additional hazard assessments

300

What does depth of field refer to in camera operation?

A. How far the camera is from the subject

B. The range of distance that appears in focus

C. How bright or dark the image is

D. The number of colors the camera can capture

B. The range of distance that appears in focus

300

In three-point lighting, which light is positioned behind the subject to separate the subject from the background?

A. Back light

B. Key light

C. Fill light

D. Background light

A. Back light

300

What is the main purpose of a production schedule during pre-production?

A. To write the dialogue for the video

B. To calculate the total cost of production

C. To list all the equipment needed

D. To organize when and where filming will take place

D. Organize when and where filming will take place

300

Which law protects original creative works like videos, music, and scripts?

A. Fair use law

B. Trademark law

C. Patent law

D. Copyright law

D. Copyright law

300

What does a transmitter do in A/V production?

A. Receives audio or video signals from another device

B. Makes signals louder

C. Sends audio or video signals wirelessly to another device

D. Records audio and video to a memory card

C. Sends audio or video signals wirelessly to another device

400

Which element is NOT typically part of a story in video production?

A. Resolution

B. Camera brand

C. Characters

D. Conflict

B. Camera brand

400

How does focal length affect a camera shot?

A. It only affects how sharp the image is

B. It changes the colors in the image

C. It controls how bright or dark the image appears

D. It determines how much of the scene is captured and how close subjects appear

D. Determines how much of the scene is captured and how close subjects appear

400

The rule of thirds is a principle of:

A. Lighting placement

B. Audio mixing

C. Production scheduling

D. Composition for framing shots

D. Composition for framing shots

400

In pre-production planning, what document estimates the costs of a project?

A. Budget

B. Production schedule

C. Shot list

D. Script

A. Budget

400

What is the purpose of adding captions or text during post-production editing?

A. To cover up mistakes in the footage

B. To enhance the video by identifying speakers, locations, or providing information

C. To replace all audio in the video

D. To make the video look more professional without adding information

B. Enhance the video by identifying speakers, locations, or providing information

400

What does a receiver do in A/V production?

A. Stores video files for later editing

B. Sends audio or video signals to another device

C. Converts video files to different formats

D. Receives audio or video signals wirelessly from a transmitter

D. Receives audio or video signals wirelessly from a transmitter

500

What is the primary purpose of a tripod in video production?

A. To stabilize the camera and prevent shaky footage

B. To hold lighting equipment

C. To make the camera taller

D. To improve audio recording

A. Stabilize the camera and prevent shaky footage

500

What is the relationship between the iris, aperture, and f-stop?

A. They control audio recording levels

B. They only affect how sharp the image appears

C. They all work together to control the amount of light entering the camera

D. They control three separate functions: focus, zoom, and color

C. Controls the amount of light entering the camera

500

What composition technique suggests leaving space in front of a moving subject?

A. Depth of field

B. Nose room

C. Lead room

D. Headroom

C. Lead room

500

During post-production, what is the process of arranging video clips in the correct order called?

A. Color grading

B. Sequencing

C. Rendering

D. Audio mixing

B. Sequencing

500

What video editing technique is used to smoothly move from one clip to another?

A. Cut

B. Special effect

C. Filter

D. Transition

D. Transition

500

Which file management practice is most important for protecting video project files?

A. Keeping all files on the camera’s memory card

B. Using creative file names

C. Compressing all files to save space

D. Creating backups in multiple locations

D. Creating backups in multiple locations