Airspace
FAA Rules
ATC
Pilot Responsibility
SCENARIOS
100

What class of airspace is generally associated with the busiest airports in the United States? 

Class B

100

What does the FAA stand for?

Federal Aviation Administration

100

What does ATC stand for?

Air Traffic Control

100

Who has the final authority for the operation of an aircraft?

The pilot in command

100

You are flying toward Class B airspace but haven't received the required clearance. what should you do?

Do not enter the Class B airspace; remain clear until the appropriate clearance is received. 

200

What class of airspace is normally found around airports with operation control towers?

Class D

200

What does FAR stand for?

Federal Aviation Regulations

200

What is the primary purpose of ATC?

To help manage air traffic and provide services that promote safe and efficient aircraft operations.

200

What does (PIC) stand for?

Pilot in Command

200

You're about to take off when you notice the weather is becoming unsafe. Are you required to take off because you already planned the flight?

No, the pilot can delay or cancel the flight. 

300

What class of airspace is generally uncontrolled?

Class G
300

What is the purpose of FAA regulations?

To establish rules for the safe operation of aircraft and the aviation system.

300

What should a pilot do if they don't understand an ATC instruction?

Ask ATC to clarify or repeat the instruction.

300

Before a flight, what are some things a pilot should check?

Weather, aircraft condition, fuel, airspace, etc. 

300

ATC gives you an instruction that you believe would put the aircraft in danger. What should you do?

Maintain safe control of the aircraft and communicate with ATC about the situation. 

400

Which class of airspace generally begins at 18,000ft MSL and extends to FL600?

Class A

400

What is the name of the regulation the establishes general flight rules, including right-of-way rules and aircraft operation requirements?

14 CFR Part 91

400

What does a pilot generally need before entering Class B airspace?

An ATC clearance

400

Can a pilot legally fly simply because something is technically allowed by regulations?

Not necessarily. The pilot still has to consider whether the flight can be conducted safely.

400

You're flying and another aircraft appears to be on a collision course with you. What should you do? 

Take appropriate action to avoid a collision while following the applicable right-of-way rules.

500

What class of airspace is controlled airspace that is not classified as Class A, B, C, or D?

Class E

500

What regulation generally establishes the requirements for obtaining a private pilot certificate? 

14 CFR Part 61

500

You're approaching an airport with Class D airspace. What should you generally do before entering the Class D airspace?

Establish two-way radio communication with the control tower.

500

A pilot discovers a problem with the airplane during the preflight inspection. What should they do?

Determine whether the aircraft is airworthy and the issue is properly addressed before flying. If it isn't safe or airworthy, the pilot should not fly it. 

500

You are planning a cross-country flight. You discover that your route passes through several different classes of airspace. What should you do before departure?

 Identify the airspace along the route, determine the applicable requirements, review the relevant charts and information, and plan how you'll comply with them.