40-1
How many IACP’s are there?
7
How do you fix bit code 2/3 on IFF?
Replace the KIV-77
What engine parameter does EFAS observe?
N1
What is the difference between mixed and Y mode?
Y mode is only usable when GPS keys are loaded
What is the first in troubleshooting if you have a CCM bit code 9?
Align EGI’s
What is the safety requirement for operating HF?
The skin must be clear of personel
What wxr mode is used during takeoff and landing to detect windshear events?
PWS(Predictive wind shear)
What is the max tolerance for fuel flow indication when all engines are off?
250pph
What are the 4 sources for pitch and attitude?
EGI 1/2, VG, and standby ADI
Where is the FPA(flight performance application) stored?
IOC
What is the primary controller for comm 2/3?
VHF/UHF RCP
What are the 3 ways you can provide IFF with the current time?
EGI1/2 and manual input
Which test is the gpws discreet input test?
Level 6 test
Where does the nav station altimeter get its static pressure from?
Pitot tube static ports
What do you need to input to the ifmp to load %mac?
Weight and balance
What inspection must be done to the ELT every 15 months?
Magnetic reed switch operational checkout
What are the 4 signals that the MMR receives and processes?
VOR/ILS, Marker beacon, MLS, and GPS
What engines does EFAS use to determine how to kick the rudder?
1 and 4
What is the fix for when you go to initialize EGI alignment and you get a “check INU mode” annunciation?
Reset system power
When capacitance checking a comp probe, what should the pF read?
63.9-71.1 pF
What inputs are required for COMM1 to use its anti jam capabilities?
WOD, TOD, and net number
What systems are required for TCAS to operate fully?
IFF, radio altimeters, DADC’s, and EGI’s
Where can the oil calibration data for each jet be found?
781A’s note page
In RVSM airspace, what is the maximum allowable difference between both altimeters when they are both in STBY mode with an A displayed on the altimeter?
100 ft
What IPC module is responsible for providing IMFD information?
CCM