DAS
RADAR
EOTS
CNI
Wire Repair
100

How many DAS Cameras are located throughout the F-35B?

Six

100

What is the LCN for the RADAR system as a whole?

A94xxxx

100

What does the Acronym EOTS Stand for

Electro-optical Targeting System

100

How many CNI Racks are there in the F-35B?

Two

100

What Publication do we use for Wire Repair

01-1A-505 series

200

Where is DAS # 6 located on the F-35B?

Upper/Aft Fuselage behind the ULF Door. 

200

What module is A1 in the MFA Rack and what does it do?

Input Power Filter Module, Filters 270 VDC from the A/C, also supplies power to auxilary and Drain Power Supply Modules

200

What side of the ICP Rack controls the EOTS system?

ICP "B"

200

What supplies backup power to the crypto keys when the aircraft is powered down?

The CNI battery

200

How do you determine the correct tool to use when crimping wires on an Aircraft

JTD and/or 01-1A-505 series

300

How are DAS sensors cooled?

Polyalphaolefin (PAO)

300

The Multifunction Array (MFA) is a RADAR antenna that transmits and receives what type of signals?

Radio Frequency (RF) signals.

300

When lowering EOTS, what must be visually inspected with mirror and flashlight to make sure they are fully disengaged from two aircraft brackets and fully recessed into AIS?

Four forward captive fasteners

300

CNI rack 3B is located behind what door/panel?

Door/panel 2122.

300

What tool is utilized to crimp pins?

"Star Crimps"

400

What side of the ICP Rack controls the DAS system?

ICP "B"

400

What does the RADAR Mode "AS" stand for?

Air-to-Surface (AS)

400

What Line Replaceable Component (LRC) within the EOTS is responsible for the pointing function within the EOTS assembly?

Gimbal Assembly

400

How many TFR modules are there on the F-35B?

Two (one in each rack)

400

What tool is utilized to melt solder sleeves and/or heat shrink?

Heat Gun

500

Once the DAS system has been initialized, how long does it take for the system to be cooled to subzero temperatures (in degrees C) to obtain the desired IR performance?

Approximately 7 minutes for standard day ambient temperatures after power has been commanded to the sensor(s).

500

What side of the ICP Rack controls the RADAR system?

ICP "A"

500

What must be pulled and turned to clear bracket while lowering EOTS?

The (2) Downlock Pins

500

What do the CNI modules within the CNI rack interface through?

Rack backplanes

500

What volume of the 01-1A-505 covers fiber optic cabling?

01-1A-505-4