Safety and Hazard Recognition/incident-Accident
Hazard Recognition, Evaluation, and Control
Fall Types and Hazards
Struck-By Hazards
Electrical Safety Guidelines
100

Companies with strong safety cultures usually have lower 

Turnover

100

A measure of the probability, consequences, and exposure related to an event is referred to as 

risk

100

What percentage of all accidental deaths in the construction industry are caused by slips trips, and falls on walking and working surfaces?

15%

100

When stacking material such as brick or block, do NOT stack maters beyond a 

4:1 Hight-to-base ratio

100

One of the most common grounding systems used for protection against accidental electrical shock is the 

three-wire system

200

An unplanned event that may or may not result in property damage is know as a 

Incident

200

Vacuums used to capture silica dust MUST be equipped with 

HEPA filters

200

The D-Ring or support point on a safety harness should be place

Between the shoulder blades

200

Benching systems are prohibited in

Type C soils

200

A polarized electrical receptacle is used for 

double-insulated tools

300

Poor lighting, excessive noise, and inadequate guards or moving parts are example of 

unsafe conditions

300

Positive and negative fit checks should be performed on a respirator 

every time it is worm

300

Lanyards that have no shock-absorbing features are used for  

positioning
300

In the absence of other information, all soil in a excavation should be treated as if it is 

Type C soil

300

Which of the following is the CORRECT practice for a lockout/tagout situation?

 Multiple lockout devices are repaired when more than one person is working

400

The activity that consists of breaking a job into its component task and then analyzing each step for potential hazards is call a 

job safety analysis

400

Hepatitis can be caused by contact with

blood

400

The highest safety level on an extension ladder is the 

fourth rung from the top

400

Daily inspection of an excavation must be performed by a (n) 

Competent person

400

In general, eye protection is required

 Whenever on the job site

500
Instead of removing fuel from a fire, extinguishers are designed to remove

heat or oxygen

500

Which of the following conditions is considered life threatening

Heat stroke

500

When standing on a scaffold, it is important to confirm that 

the wheel brakes on the scaffold are locked in place

500

OSHA`s CFR, Part  is know on work sites as the 

Silica standard

500

As a rule you should use hearing protection if you must raise your voice o heard by someone who is 

Less than  feet (cm) away