Show:
Q1
Q2
Q3
Q4
100
Name Q1, 2017 Fatality Prevention Blitz Campaign topic
Electrical safety
100
What is the topic for 2Q 2017 Serious Injury and Fatality Prevention(SIF) Blitz-Campaign
2Q topic is "H2S Safety"
100
Name the Q3 2017 FP Blitz Campaign topic
Q3 topic is "Isolation of hazardous energy".
100
What is the Fatality Prevention Blitz-Campaign topic for Q4, 2017?
Heavy Equipment Operation.
200
Why is electric current hazardous?
Flow of electric current through human organ can cause cardiac arrest, breathing arrest, brain damage, electric shock, burns, twitching muscles, fatality.
200
Where are SCBAs stored and who can use them?
In SCBA storage cabinets located in process areas and field facilities. Intended only for operational personnel.
200
What document describes methods of isolation of hazardous energy?
TCO SI-106 Isolation of Hazardous Energy
200
Is it allowed to do repairs of heavy equipment on site?
No, it is not, since the required equipment and conditions for repairs may not be available on site.
300
What do you pay attention to prior to pluging the equipment in?
Cables and wiring (make sure that power cords are free of notches, cuts and worn-out areas), grounding, equipment case (check that there is no visible damages on the case)
300
Describe the sequence of actions when wearing a mini-filter?
Hold your breath; Take the emergency respirator out of its bag; Remove the emergency respirator from its case; Clip your nose with nose clips; Insert the mouthpiece into your mouth.
300
What color can tags be and what does each color mean?
yellow - Operations, blue - General Maintenance, red – Electrical, blue/orange - Mechanical, red/white - Instrumentation
300
What is the frequency of documented visual inspection of heavy equipment?
Every shift. Operators shall check the condition of the heavy-duty equipment every shift, fill in the checklist for compliance with safety requirements.
400
Name main requirements to grounding a piece of equipment?
1) Check that grounding is in place, for external view and visible damages 2) Grounding depth shall be not less than 50 sm.
400
How often shall your personal H2S detector go through a bump test? How do you know, when your personal H2S detector is due for the bump test?
Every 30 days, and after each H2S activation episode. in the new BW Clip model, a specific indicator appears on LCD, and the detector starts flashing with a certain frequency.
400
What are the isolation locks and what color are they? What is a lockbox?
Isolation locks are green colored locks used by operators for installation on isolation and control points (drain valves and start buttons) Lockbox is a box for storing a key of a set of green locks. It is used by services that perform maintenance work on isolated equipment.
400
What are the root causes of incidents associated with heavy-duty equipment?
1) Lack of maintenance procedures or their poor quality; 2) Inadequate heavy-duty equipment maintenance checklists; 3) Failure to follow the maintenance schedule or manufacturer’s maintenance requirements; 4) Insufficient personnel or resources for the heavy-duty equipment maintenance; 5) Lack of required equipment.
500
What actions shall be taken when seeing a person being electrocuted?
1) Ensure your own safety - use dry gloves, rubber boots, if possible turn off the power source. When approaching the injured person on the ground, take small steps which shall not be more than 10 cm. 2) Throw down the wire from the injured person using dry non-conductive object (stick, plastic) or cut the wire with an axe with a wooden handle. 3) Pull the injured person by the collar at least 10 meters away from the scene, should the IP's clothes be dry. If clothes are damp or wet, wrap your hand with dry cotton cloth and pull the IP. 4) Call 5555 or radio channel 2, or call an ambulance. 5) If you have skills and completed appropriate training, provide first aid to the IP.
500
What are the barricading requirements for an area with gas hazardous work in accordance with Prikaz 388-10?
The site must be barricaded in such way that potential H2S emission source had at least 10 meters around.
500
Why do we need blinds? Where blinds position must be listed and marked up?
to ensure 100% isolation of energy source. None of the valves ensure a total isolation. Blinds must be listed on the backside of EIP (Equipment Isolation Permit) and blind installation positions must be marked up on isolation diagrams.
500
What types of vehicle maintenance do you know?
• daily maintenance - includes all activities to be performed to ensure safe traffic, safe oil service and maintain proper outside appearance of a vehicle. • regular maintenance - includes a specified scope of work to be performed after reaching a certain mileage • seasonal maintenance - includes all activities to be performed to prepare a vehicle for winter and summer periods based on the manufacturer's recommendations.