Chainsaw
Plumbing
Electrical
Carpentry
Machines
100

What is the standard distance for someone who is not the chainsaw operator to stand?

10-15 feet

100

What type of metal are plumbing pipes typically made of?

Copper

100

How far should your staples be from the box?


no more than 6 inches


100
What PPE should be worn when working with wood and woodworking tools?

Safety glasses, gloves, pants, close-toed shoes 

(name 2)

100

What type of fuel does the Gator use?

Deisel 

200

What PPE are necessary for using the chainsaw?

Safety goggles, chaps, boots, helmet, gloves, vest, ear protection, and face shield.

200

What are the two steps to be taken before solder can be applied to a joint?

1) clean all contacting parts

2)apply flux to all contacting parts

200

How much coating should you strip from a wire before connecting?

5/8 inches

200

Name three types of wood, two hard and one soft.

Hard: Maple, oak, elm, walnut, hickory, ash....

Soft:  Pine, cedar, spruce....

200

what should you add to your fuel when you put a machine away for the winter season?

Fuel stabilizers

300

What are the two acceptable ways to start the chainsaw?

Knee-start and foot-hold start.

300

What type of material is typically used for drains?

PVC 

300

All white wires on a single-pull switch and a receptacle should be in the switch box, true or false?

True

300

what type of joint fits two equally angled pieces of wood together, as opposed to butting them straight up against one another

Miter or mitered Joint

300

what type of fuel does a 2-stroke engine take?

gas/oil mix

400

What are the safety features on the chainsaw?

Chain Break, chain-catcher

400

What type of solder should be used?

Lead free.

400

What size wires should you use for a kitchen?

12

400

Mr Jones used drywall screws to build his shed because they were cheap, and now it's falling apart, what should he have used instead?

outdoor construction screws


400

how do you clear a jam or clog from a snowblower?

Use the jam clearing stick, never, under any circumstances, reach in with your hand.

500

What are some ways to trim a trees branches that are out of reach?

Using a bucket, Rope and harness, pole saw.

*points awarded for any two, no points for saying "Ladder".

500

what needs to be done to join a copper pipe to a galvanized?

you need a brass fitting between them.  (brass is a friendly metal)

500

What gauge wire is used for lighting but not outlets where there will be a heavy load?

14

500

What makes plywood strong as well as dimensionally stable?

The wood grain on every other layer is perpendicular to the one above it, preventing both warping and splitting.

500

How may people on a lawnmower at one time?

1