CAD Requests
The attachments that we use for seamed Metal Roofs...
What are the S-5-U Clamps?
If an opportunity in SOLO has the CAD, the CAD ENG, and the Permit we can update this in Salesforce.
What is the Perfect Packet Received Date?
A basic description of a One-Line...
What is a diagram that shows the connection of electrical components?
What you update in SF Files if you change the Aurora Design during the CAD Process...
What is title the old design "Original Design" and upload the new design titled "Aurora Design"?
A PDF file that contains the blueprints needed to accurately install a solar panel system...
What is a Computer Aided Design (CAD)?
The equipment we use for a Ground Mount system...
What is the "Sun Turf - Sunmodo Ground Mount System" and the "XR-10" railing?
What you would type into "Compass Direction" for a house with 1 array of 10 panels at 180 degrees, and 1 array of 6 panels on another roof face also at 180 degrees...
What is 10@180; 6@180?
If something in the One-Line needs to be changed, you would do this...
What is request an Electrical Revision in SOLO?
What you do when SOLO impedes your design and sends you a New Layout...
What is cross-reference your Aurora Design with their new layout and decide if it makes sense to change the design?
What you do if the correct Utility Company doesn't come up during a CAD Request...
What is choose any one of them and type into the notes; "Utility Company: *Correct Utility Company*"?
Another term for Structural Engineering Stamp...
What is a CAD ENG?
We would need to request a new CAD ENG in this situation...
What is only when panels are being moved to a new roof face?
If a One-Line is rejected, this is what you are supposed to include in the Electrical Revision Request...
What is a Revision Letter from the Electrician (screenshot) and Revision Notes?
You send SOLO this when your CAD is initially impeded for fitment reasons...
What is your “Design Measurements and Pitch”? (and respond to the impediment having them reference your measurements to see if they are drawing it as the correct size)
What you put into SOLO for an "Interior Load Breaker"...
What is a "Main Panel Breaker"? (and write in the SOLO notes: "Preferred Interconnection: Interior Load Breaker")
What you are supposed to include in a CAD Request for Xcel...
What is the "MN Xcel Case #" and the "Xcel Program Type"?
What you do with a CAD ENG that is uploaded as a Zip File...
What is combining the letter and CAD ENG into 1 PDF?
If you request a revised CAD, and the panels did not move to new roof faces, you would not need a new ENG Restamp.
What you do when you have resolved an email that was assigned to you in Spark (likely for a CAD impediment)...
What is mark the email "Done" in Spark?
What you do when the status of your CAD says "CAD on Hold"...
What is follow up by posting in SOLO’s chatter: “Hey @CADSupport, please advise CAD on hold status. Thank you!”?
If you have CADs in your queue, this is the right time to do them...
What is as soon as possible?
Change CAD "Rejection" back to "None" in Salesforce after you have done this...
What is only when you have replaced the old CAD with the new CAD in the Salesforce files?
This is not supposed to be included on an OPPD One-Line...
What is a PV Production Meter?
What you do if a CAD is impeded for missing SA / Zip File photos...
What is compress the SA Zip File from the Work Order and upload again? (continue CAD)
What you do when the API creates duplicate accounts...
What is write a message in the SOLO chat? (saying "Hey @CADsupport, the API duplicated this CAD Lead. Could you please cancel this extra account? Thanks!")