Lighting
Where would you go to look at the lasers
Installation > Illumination > Lasers
Where would you go to calibrate the camera
Installation > Calibration
Which window would you adjust if you weren't capturing enough of the bacon on the left
Outside frame
Competive Art used to be a sport in which major event
Olympics
you notice that you have no red light flashing while you are running but the red LED's are set to 45. What one of two things could you check?
Make sure the board is not bad.
Make sure lights are set to All.
What is the optimal laser light setting?
100 Laser 0
80 Laser 1
70 Laser 2
What should be used to calibrate the camera
Calibration Plate
Right window
The majority of your brain is what?
You are capturing to much debris on the right side of the conveyor, what to check
check filter setting
What should the blue light typically be set to
0
When do you calibrate the camera
After replacing, or moving of the camera
Where would you go to show the "high def" image in the live image or in saved images
TV task mod, save to both
The fear of packed holes is known as what?
Trypophobia
What is the reason the product is glowing?
Shutter time could be to high.
What should the red light be set to?
45
make sure light is flashing,
make sure exposure time in capturing is not very low. Typically 394-487.
Recording was off
What is the only planet to spin clockwise
venus
You notice the that you have a laser line kind of going off of the side, what is something you should check.
Check to make sure the lasers are aligned.
How many segments does the 702 use for the red LED
What should edge length be set to in the calibration screen
40mm
Where do you go to look for previous sliced images.
Inspection > test measurement.
The spanish national anthem has how many words
0
If you notice that you are only capturing half of the bacon but the window is around the whole bacon (so we say it is good) what do you think the issue is?
Threshold could be to high,
lighting could be to low.