Safety
Prevents injuries from flying particles and chemical splash's
What is eye protection
Hand tool used by carpenters they keep in their tool belt that have increments of 16 inches?
What is a Tape Measure or Ruler
Provides a foundation base on which to spread the load of a structure over a wider area of soil
What is the Footing
Two types of wall framing used in construction
What are Platform and Balloon
Vertical distance from the wall top plate to the top of the roof is called?
What is Rise
Eye, Ear, Head and Clothing is this type of equipment
What is Personal Protective Equipment (PPE)
Outside 90 degree corner of the framing square is called
What is the Heel
Footing must be located below the
What is the Frost Line
Installed in framing to slow the spread of a fire
What are Draftstops
The length of a rafter measured from the bird month to the ridge is called?
What is the Line Length
OSHA standards require fall protection when workers are working at heights above _______ feet
What is 6
Saw cut of a blade is called
What is the Kerf
Performed by inspectors on the job site to determine the consistency and workability of concrete
What is a Slump Test
Truss design to accommodate 12 inch ceiling insulation is called
What is a Modified Truss
Hand tools used to make measurements on a common rafter?
What are Speed Square or Framing Square
what is designed to prevent cuts on a saw?
What is riving knife
The size of a power drill is determined by the capacity of
What is the Chuck
Another name for Cinder Block
What is Concrete Masonry Unit (CMU)
Joist lapped over a girder requires _______ inch minimum lap and maximum overhang of _______ inches
What is 3 inches and 12 inches
True or False
Roof Trusses can be built on site by carpenters?
What is False
Distance from extension ladder base to the wall is _____ the vertical height
What is One- Fourth or the 4 to 1 rule
Tool used to drive specially designed pins or nails into masonry or steel
What is a Powder-Actuated Driver (Ramset)
Concrete is sold by the cubic yard, What is the Formula
What is Thickness x Width x Length divide by 27
A piece of dimensional lumber used to fasten shower heads, shower faucet and wall mounted sinks is called?
What is backing
Roof sheathing requires nail fastening on panel edges every ______ inches and intermediate every ______ inches
What is 6 inches and 12 inches