Construction
What is .0833
We typically require our grading contractors to prep their subgrade to +/- .10 foot. This would mean they leave it within 1.2" overall.
The term "CMU" refers to what building material?
What is a Concrete Masonry Unit
What is a 'square'
This discussion is held before any physical construction or prep work begins for a specific scope or task (element) to ensure everyone involved is on the same page and to address any potential issues early on.
What is a pre-install meeting
Pre-install meetings are critical to successful building and should include discussion about plans, specs, scope, means and methods, safety concerns and procedures, sequencing, scheduling, inspections, mock-ups, and expectations of the finished product (end in mind)
An 8" CMU is how wide?
What is 7 5/8"
How many bundles of asphalt shingles are typically required to cover a 100 square area of roofing?
What is three bundles
What is a standard stud length for 8' walls?
What is 92 5/8"
Also, studs are 104 5/8" long for 9' walls and 116 5/8" long for 10' walls.
Carpet flooring is typically estimated and sold in this area measurement
What is a Square Yard (SY)
A W12x50 steel beam weights how much per foot?
What is 50 lbs per foot
A fixed, permanent, and known point of reference used for establishing elevations or altitudes during surveying and construction.
What is a benchmark
A benchmark serves as a basis for measuring vertical accuracy and aligning construction work, ensuring structural integrity and functionality.
A fire-rated variation of Type X drywall, this drywall product provides increased fire resistance and is often used in ceilings and where higher fire ratings are required, such as in firewalls and floor/ceiling assemblies.
What is type C drywall
Type C typically has a special core formulation that compensates for shrinkage during fire, ensuring that it can withstand higher temperatures.
Type C gypsum board can be used to reduce the number of gypsum board layers in a floor-ceiling assembly or the overall thickness of a wall assembly.
What does the acronym "FACP" refer to?
What is a Fire Alarm Control Panel
This test is also known as a compaction test and is a common laboratory method used to determine the optimal moisture content and maximum dry density of a soil sample, crucial for ensuring proper compaction in construction projects.
What is a proctor test
A pressure test, or hydrostatic test, for a sprinkler system verifies its integrity by pressurizing the piping to a specific level (typically ________ ) and maintaining it for a set duration (typically _____) to detect leaks.
What is 200 PSI for 2 hours
The standard thickness of a standing seam metal roof for the majority for the pre-engineered metal buildings we build.
What is 24-guage