CGC Hagersville Safety
As of April 11, 2018, how many hours since a lost time injury?
4 million
_______ means tight fitting eye protection, which can be worn over regular safety glasses or by itself instead of safety glasses. They should not be confused with regular safety glasses.
GOGGLES
Al MacMillan
MPA for the Crane and Hoisting Program
Bob Sawatzky
What is the following: "Zero restricted duty and lost time injuries in 2018"
Safety Goal
Name at least 6 forms of personal protective equipment used at CGC Hagersville
High Visibility clothing/vest, Eye protection, Steel toe boots / shoes, Gloves, Leather and cut resistant, Hearing protection, Hard Hats, Aprons, Face Shields (Grinding, using Compressed Air), Welding Helmets, Jackets, Leather Gloves, Chemical Resistant Suits, boots, Fall protection, Respirator, Self Rescuer, Cap Lamp (mine)
2.15.1 No Employee in the plant is to build _______. ________ must be constructed and inspected by a third party, qualified technician.
Scaffolding
What are two (2) characteristics that make confined spaces different from any other regular space?
A confined space is:
1. Not designed for continuous worker occupancy
2. A space where atmospheric hazards can occur
Eg. Limited openings for entry and exit, unfavorable natural ventilation, source of air contamination
What level of training is required by:
Reliability management, project engineers, mechanics, electricians, maintenance personnel, Supervisors of Operators Completing Routine Lifts, and others required to supervise non-routine lifts
Level II
How many lost time injuries did CGC Hagersville have in 2017?
Zero
Area of the plant required to wear Class 3 High Visibility Safety Apparel
Mine
Fork Truck Operation
3.3.2 ___________ report is to be completed prior to operating equipment
Pre-shift safety inspection report
Any 2 out of 4 permits needed for confined space
1. Confined space entry permit
2. Confined space entry attendant checklist
3. Rescue Equipment - Pre use inspection checklist
4. Confined Space Entry Coordination Permit (Only with Contractors)
The weight range for Non-Routine Lifts (defined as a non-production lift requiring rigging)
2000 lbs - 20,000 lbs
What is this month's Monthly Safety Meeting Topic? (August 2018)
Fall Prevention
25 KM/Hr
How many volts is considered to be "High Voltage" for electrical maintenance?
600 volts
A confined space attendant will continuously monitor the air inside the confined space and record the results every ___ minutes
15
an apparatus which may be a part of a crane, exerting a force for lifting or lowering
What is a hoist?
Who is the new management Co-Chair of our Joint Health and Safety Committee replacing Chad Strohm?
Allan MacMillan
What is CGC Hagersville's safety rating goal for 2018?
0.65
Three types of fire classes and their common causes.
• CLASS "A" (combustible) Fires are those that occur in common combustible materials, such as wood, paper, rags, etc.
• CLASS "B" (flammable liquids) Fires are those involving flammable liquids, grease, oils, etc.
• CLASS "C" (Electrical) Fires are those involving electrical equipment in close proximity to electrical circuits.
Name any 3 items present in a confined space rescue equipment?
1. Tripod
2. Ventilation kit (blower, tubes)
3. Ropes
4. Winch
5. Carabiner (shackle)
6. KED (Kendrick Extrication Device)
7. SKED
The process of safely attaching a load to a hook and lifting device by means of adequately rated and properly applied slings and related hardware.
What is rigging?
A Risk Assessment is a tool by which we can determine the seriousness of the risk associated with each hazard. What equation is applied to determine the risk?
Risk = Probability x Consequence (Severity) x Exposure