Terms
Sanitization
Disinfection
Sterilization
Other Methods
100

____________ the process to remove organic matter from an article and to lower the number of microorganisms to a safe level as determined by public health requirements.

sanitization

100

Utility gloves over clean disposable gloves should be worn during sanitization to protect the hands from ________________.

(4 things)

bloodborne pathogens

infectious materials

irritating chemicals

cuts or punctures

100

_______________disinfection is a process that destroys all microorganisms but not spores

high level

100

Sterilization strips should be positioned in the ______________ of the wrapped pack.

center

100

Which sterilization method is often used by medical manufacturers to sterilize disposable items.

ethylene oxide gas

200

___________the process of destroying all forms of microbial life, including bacterial spores.

sterilization

200

During sanitization, what type of detergent is used?

low-sudsing

200

OSHA recommends _______________for the decontamination of blood spills.

10% bleach in water

200

The proper time for sterilizing an article in the autoclave depends on________________

intended use

200

____________is less corrosive than moist heat for instruments with sharp edges.

dry heat oven

300

____________substance that kills disease-producing microorganisms but not their spores.

disinfectant

300

During sanitization, why is it important to check instruments?

working condition

300

Before disinfection can occur, the articles must be __________first

sanitized

300

____________refers to items being sterilized in the autoclave.

load

300

___________involves the use of chemical agents for an extended length of time.

cold sterilization

400

____________an apparatus for the sterilization materials, using steam under pressure.

autoclave

400

During sanitization, ______________hinged instruments.

lubricate

400

Why should all organic matter be removed from an article before it is disinfected?

allow disinfectant to reach all parts of the article

400

The most common temperature and pressure used for autoclaving_____________________

250'F at 15 pounds of pressure/square inch

400

______________uses high-energy ionizing radiation to sterilize instruments.

radiation
500

____________hard, thick walled capsule formed by some bacteria that contains only the essential parts of the protoplasm of the bacterial cell.

spore

500

Name the two methods to clean instruments.

manual

ultrasound

500

The period of time that a disinfecting solution is effective after it has been activated is known as its_____________.

use life

500

What type of water should be used in the autoclave?

distilled

500

The most common temperature for a dry heat sterilization is ________________

320'F for 2 hours