Clipper
Jeopardy X's 5=500pts
5. When holding haircutting shears properly, the barber places the thumb in the thumb grip of the _________.
moving blade
10. When using clippers, cutting hair ______ cuts the hair shorter .
against the grain
1. __________ combs can retain heat to help set-in a hairstyle.
Metal
19. The position of the hone when being used should be _____.
perfectly flat
Jeopardy TRIPLE=300
15. The width of a razor is measured either in eighths or ______ of an inch.
sixteenths
13. The size of a razor is measured by the blade’s ______.
length and width
22. The direction of the razor stroke when stropping is _______.
the reverse of that used when honing
9. Clipper guards are also known as _______.
attachment combs
Triple 600PTS
6. One blade of a beveled shear is usually plain ground, and the other is ________.
corrugated or serrated
4. Even shears with the finest cutting edges can be poor cutting tools if they are ___________.
not set correctly
23. The least acceptable method of removing loose hair after a haircut is the ______.
Neck duster
7. Electric clippers are driven by rotary, magnetic, or _______ motors.
Pivot
3. To keep rubber combs in good condition, avoid extended contact with ___________ .
Disinfectants
14. The temper of a razor indicates its degree of ________.
Hardness
double 600PTS!!!!
11. The main consideration in the purchase of a straight razor is the ________.
quality
2. The French style of haircutting shears have ______ finger rest (tang).
one
8. Clipper blades are usually made of _________.
Carbon Steel
12. The grind of a razor refers to the shape of the ______.
Blade
16. Honing and stropping are necessary for such implements as ________.
conventional straight razors
24. The appliance that is used to introduce water-soluble products into the skin is the ______ .
Galvanic Machine
Jeopardy Double 1000pts
25. An implement used to press out blackheads is a(n) ______.
comedone extractor
17. A hone is made of _______.
abrasive material
20. The type of stroke to use when honing a razor is a(n) ________ .
smooth and even stroke
21. Additional finishing on a leather strop is required when the razor edge is ______.
coarse
18. The purpose of a hone is to ________.
grind the razor’s edge