Show:
LPS
Electrical Standard
Fall Protection
PPE
Site Safety
100
What does SPSA stand for?
Safe Performance Self Assessment
100
When performing live electrical work, what is the cutoff voltage where a live electrical work permit is required?
50 volts
100
How often do fall protection harnesses need to be inspected?
Annually
100
What does PPE stand for and why is it important?
Personal Protective Equipment. It is the last line of defense from preventing an injury!
100
What is the Clinton site extension to report a minor emergency?
ext 2580
200
Who is typically responsible for conducting LPO feedback sessions?
The LPS supervisor of the worker observed
200
What is "arc flash boundary"?
The distance from an electrical hazard where a person wearing no PPE will receive a 2nd degree burn.
200
When is fall protection required? (vertical and horizontal distances)
Whenever a person is within 6ft horizontally of a 6ft or greater fall.
200
When is it appropriate to wear spoggles?
Whenever there is a dust hazard present where debris could go around regular safety glasses and come in contact with the eye
200
Who should you call immediately after being injured or experiencing a near loss?
Your direct supervisor
300
When is the right time to perform an SPSA?
All the time!!
300
When is an electrical standby required?
When a qualified person is working within the "restricted approach boundary" of a live electrical system 130V or greater.
300
TRUE OR FALSE: Steam piping is an appropriate tie off point as long as the diameter is 4 inches or greater.
FALSE. never tie off to steam piping.
300
TRUE OR FALSE: When wearing a face shield, a worker must also wear safety glasses.
TRUE
300
What additional group of people need to be present during any high risk work performed off hours? (Example: Type 1 Confined Space Entry)
The Emergency Response Team (ERT)
400
What are the three items that need to be listed in a JSA?
Job Steps, Hazards, Mitigations
400
TRUE OR FALSE: Opening a 480V circuit breaker for operations reasons does not require a work permit or electrical standby person.
TRUE
400
How much weight does an anchor point need to be able to hold in order to be used for fall arrest?
5000 lbs
400
What does FRC stand for?
Flame Resistant Clothing (Fire Retardant Clothing also acceptable)
400
What is the procedure for removing a red LOTO lock after a person has permanently left the site?
Section head approval, tracing out the line, attempt to contact person who's name in on the lock and obtain verbal consent.
500
When should you submit a near loss report?
Whenever there is an incident that could have resulted in a loss (personnel injury, environmental release, financial loss, etc)
500
When should electrical guarding be installed on live parts?(voltage)
Live equipment over 50 volts.
500
What is the safest way to tie off for fall protection when descending into a manhole in an open area? (example: center of a parking lot)
Set up a tri pod and use a self retracting lanyard
500
How can you tell what your gloves are appropriately rated for?
Check the 4 digit number code on the top side of the glove
500
Who has the right to intervene and stop a job that seems or is unsafe?
Everyone!