CIRCUIT
Series Circuit
Parallel Circuit
Safety Devices
100

If the switch is off, the circuit is ________ (open or closed).

Open

100

If you add another battery in a series ciruit, what will happen to the bulb? (Brighter, Dimmer or Same brightness)

Brighter

100

What happens to the total resistance of parallel circuit if more loads are added?

Decreases

100

What type of circuit do water heater use?

Series Circuit

200

What are the 4 components of a circuit?

Voltage source, conducting wires, load, switch

200

Two bulbs are connect in series. If bulb 1 has a current of 10A, what is the expected currrent of bulb 2?

10A

200

Two bulbs are connect in parallel. If bulb 1 has a voltage of 2V, what is the expected voltage of bulb 2?

2V

200

What do circuit breakers have that breaks the circuit when it exceeds the maximum current?

Electromagnet

300

Electrical load converts __________ energy to other forms of energy.

Electrical Energy

300

If 3 bulbs with resistance of 5 Ohms each are connected in series with a voltage source of 20V, what is the total resistance?

15 Ohms

300

Three bulbs are connected in parallel with 5A current each. What is the total current?

15A

300

What device is used to allow current in 1 direction only?

Diode

400

From what side (terminal) of the battery do electrons move from?

Negative

400

Three bulbs are connected in series each with a voltage of 2V, 4V and 6V, respectively. What is the total voltage?

12V

400

If 2 bulbs with a total resistance of 30 Ohms are connected in parallel with a total current of 2A, what is the total voltage?

60 Ohms

400

Fuses use a resistance wire with a ______ melting point.

Low

500

What type of circuit should you assemble if you want to use thin wires only?

Series Circuit

500

If 3 bulbs with resistance of 10 Ohms each are connected in series with a voltage source of 90V, what is the total current?

3A

500

If 2 bulbs with resistance of 2 Ohms each are connected in parallel with a voltage source of 2V, what is the total resistance?

1 Ohm

500

Earth wires are put in so that __________ can be avoided when people come into contact with an active wire.

Electric shock