Self Work
Form lumber must have these removed immediately after lumber is stripped.
What are nails?
On this page you can find information on appropriate work clothing while on the jobsite.
What is page 4?
This energy source is the biggest hazard as it related to Traffic Control and Vehicles.
What is motion?
This section outlines safe practices for cranes.
What is section 12?
Cranes and crane loads must operate greater than this distance away from power lines.
What is 20'?
To avoid potential fuel spills and fire, we must do these 2 things when refueling generators.
What is shut off and use a funnel?
On this page you can find information on Safe Work Practices in regards to Concrete.
What is page 13?
Concrete work has these 4 energy sources listed.
What is gravity, motion, pressure, and chemical?
This section outlines safe practices for electrical.
What is section 13?
Extension cords must be construction grade and have a ground prong. This gauge cord and larger is permitted on Hensel Phelps projects.
What is 12?
During overhead drilling, power chipping, grinding, and carpentry sawing operations when windy, this form of eye protection must be used.
What is Mono Goggles?
On this page you can find information on the requirements for Hole Covers.
What is page 22?
"Chemical" is the only energy source listed next to these 2 sections.
What is Hazard Communication and Silica?
On page 56, this appendix contains Table 1 - Silica Exposure Controls.
What is Appendix A?
You cannot access scaffolds unless you have had this.
What is scaffold training?
When traveling with a load on a hill or incline using a forklift, the load must be facing in this direction.
What is uphill?
These 2 pages you can find the QR Code to access the jobsite Chemical Safety Data Sheets.
What is behind the cover and page 25?
PPE is designed to protect you from this many energy sources.
What is 7?
This section contains safe practices for working alone.
What is Section 30?
Prior to using power tools you must do this per the code of safe practices.
What is review user's manual?
Flammable and combustible storage areas must have a sign stating "DANGER No Smoking". Welding operations must not be within this distance of where flammables or combustibles are stored.
What is 50'?
On this page you can find information on if respiratory protection is required while using a Handheld drill.
What is page 58?
This energy source is responsible for the most deaths in construction year after year.
What is gravity?
This section outlines safe practices for Orderliness and Housekeeping.
What is section 4?
Only qualified and authorized employees may operate equipment. This classification of people are prohibited from operating Hensel Phelps equipment.
What is Trade Partners?