Plan
Required outlets are found in this Article.
What is Article 210 or Branch Circuits
FCC is the abbreviation for __________.
What is flat conductor cable?
This Article contains provisions for low voltage lighting.
What is Article 411?
This method of finding answers in the NEC requires the use of clues and keywords.
What is Codeology?
NFPA 70 is updated this often.
What is every 3 years?
SPD is the abbreviation for __________.
What is surge protective device?
Cable types in Chapter 3 are arranged __________.
What is alphabetically?
A piece of equipment that is commonly used to change voltages.
What is a transformer? (Article 450)
This Chapter in the NEC contains an article on Special Equipment.
What is Chapter 6?
Definitions are located in this Article of the NEC.
What is Article 100?
This Article contains branch circuit, feeder, and service load calculations.
What is article 220?
"Romex"
What is nonmetallic sheathed cable or Type NM cable?
The subject matter of Article 430.
What are motors?
When highlighting the NEC, it is advised to highlight all of these with an orange highlighter.
What are Parts?
Highlight in green.
What is the color to highlight Articles?
This Article contains requirements for ground rods.
What is Article 250?
This Article and Section contain burial depth requirements for circuits up to 1,000 volts AC.
What is 300.5(A) or Table 300.5(A)?
This Article contains provisions for plug-in window air-conditioners.
What is Article 440?
The use of the phrase "shall be permitted" means the requirement in the NEC is __________.
What is permissive?
The NEC is divided into this many chapters.
What are 9 Chapters?
This Article discusses Edison Base Fuses.
What is Article 240?
"Carflex"
What is liquidtight flexible nonmetallic conduit?
SOOW cord is found in Article __________ of the NEC.
What is Article 400?
This basic structure of the National Electrical Code is broken down into these four levels.
What are Chapters, Articles, Parts, and Sections?
One who has skills and knowledge related to the construction and operation of the electrical equipment and installations and has received safety training to recognize and avoid the hazards involved.
What is a qualified person?