cosmetic straightening
what are two methods for metal shrinking
stud gun, oxyacetylene torch, induction heater, weld on removal tools
employers are aloud to ________ an sds sheet for a materials use at the workplace
modify
what type of surface should body filler be mixed on
non porous
how should hardener be mixed into body filler
folded
polyester glazing putty can not be applied over
metal cleaners/conversion coatings
what causes oil can effect
stretched metal
a class A fire extinguisher is used for what type of materials
ordinary combustables
what forms to guide coat come in
powder, aerosol
a bare metal area surrounded by body filler after sanding indicates what
improper sanding techniques may have been used
what are vixen files used for
identifying high spots in panel dents
what can be used to identify high and low spots
guide coats, file, hand and cloth
how many sections are in a sds
16
what are the steps to performing body hammer maintenance
clamp in vise, file all directions, polish with fine sand paper, paint transfer test
tech A says body fillers may be applied to bare metal
Tech b says body filler can be applied to a windshield pinch weld area
whos is right
a only
tech a says metal is work hardened when it is formed at the factory
tech b says metal is work hardened when it is damaged
who is correct
both
finger pullers are used with which particular welded on item
wiggle wire
how many years must you keep a sds or an inventory sheet on a product after it is no longer used in the facility
30
how should body filler be applied
higher than the final contour
multiple
what can be applied over polyester body filler to cover minor surface imperfections
PLOYESTER GLAZING PUTTY
what characteristic allows steel to be formed
plastic deformation
what are the two signal words you might find on a product label
danger, warning
what is a dolly used for
metal straightening
name 3 types of dollies
heel, toe, comma, spoons, utility, shot
hardener should be _________ before it is mixed with body filler
kneaded