Who should sign and initial the permit once completed?
Entry Supervisor
Is it possible to ventilate a Confined space without ductwork?
Yes.
"Normal" Oxygen level in ambient air
20.9%
Water reactive.
What is the difference between a knot and a hitch?
A hitch will fall apart when the object is removed.
Where should the permit be located once completed?
Near the entry.
False. Monitor!
In regards to a combustible gas, your air monitor will alarm at ________
10% of the LEL
What is the last step that should be completed in a Lockout/Tagout procedure?
Verification
This type of respiratory protection falls under what larger classification?
Air Purifying Respirator (APR)
Confined Space Rescue personnel are required to perform what every year?
Simulated rescue
What type of ventilation should we use for "Hot Work"
Local exhaust
Methane has a vapor density of 0.65. Will methane rise or fall in a space?
According to NFPA 704, _____ is the highest possible number classing per the type of hazard
4
"Mode of Operation" is decided during what phase of Confined Space Rescue?
Phase I: Assessment
A entrant is never allowed to remove their retrieval line.
False. If can justify that it causes more harm.
On average, we are shooting for ____ air exchanges on scene of a rescue.
5
How long should you expect to add to the response time per foot of tubing added to your air monitor.
1-2 seconds per foot.
Dust concentration of _______ is considered a "Hazardous Atmosphere"
5'
What % of confined space fatalities are "would-be" rescuers?
60%
For a confined space to be considered "Permit-Required", it must contain 1 of the following:
Hazardous Atmosphere
Engulfment
Inwardly converging walls
Any other safety hazard
A worker falls down into a manhole. The size of the space is 10'x10'x4'. How long will it take to perform 1 air exchange with a 1,000 CFM.
0.4 minute
1% of total air volume = _______ PPM
10,000 PPM
What is the Control of Hazardous Energy Regulation number?
1910.147
Who is located in the "Warm Zone"?
Attendant, back-up team