Levels
"Plumb" means this.
What is perfectly vertical?
Before climbing a step ladder, make sure these are locked.
What are spreaders?
This is the area of a rectangle 9"X11".
What is 99 sq. in.?
This hammer is lighter and is used for trim work.
What is a finish hammer?
This is done immediately when a fire starts.
What is evacuate, and tell supervisor/instructor.
When checking for level, the bubble will move in this direction when one end is lifted.
What is towards the higher end?
According to OSHA, you may work on a ladder without fall protection as long as you are working at no more than this height.
What is 6'?
This is the sum of 3/16" + 11/16"
What is 7/8"?
This tool is used to cut holes in drywall.
What is a keyhole or drywall saw?
This is the acronym for using a fire extinguisher, and it means this.
What is PASS? What is Pull pin, Aim at base of fire, Squeeze the lever, and Sweep side to side?
Some levels have an extra vial for checking this.
What is a 45 degree angle?
An extension ladder should extend 2' above the upper landing.
What is FALSE?
If a board is 24" long, it is this in feet.
What is 2 feet?
This tool is used to "snap" lines for straight cuts and/or layout work
What is a chalk line/box?
Fire extinguishers should be inspected at these intervals.
What is yearly?
If checking level on a 10" stair tread, this would be the most accurate level to use.
What is a torpedo level?
When setting up an extension ladder, the feet should be this distance from the wall for every foot of height.
What is 3"
This is 3.25 feet in inches.
What is 39"
This tool is used by plumbers and the lower teeth are pointed forward, while the upper teeth are pointed to the rear.
What is a pipe wrench?
This class is designated for an electrical fire.
What is Class C?
When checking for plumb, the bubble will always float in this direction:
What is away from the lean?
A straight ladder may be occupied by more than one person in this situation.
What is when it is designed for more than one person?
This is 5.5 yards in feet and/or feet and inches.
What is 16' 6"
This tool is used to cut PolyVinyl Chloride pipe.
What is a PVC cutter?
This is the distance allowed to store materials from a fire door.
What is 3'