Being Unsafe
Welding
PPE
FIRE Fight
Around the Job-Site
100
Excessive noise / Poor housekeeping / Loose guard rails
Unsafe Conditions
100
Use this when lighting a torch.
Friction striker
100
Explain what PPE stands for and what it does.
Personal Protective Equipment or clothing designed to prevent or reduce injuries.
100
What is the acronym for fire-extinguishers and what does it mean?
P.A.S.S. Pull pin Aim (at fire) Spray Sweep (back and forth)
100
Work that is done near a hazard but not in contact with it
Proximity work
200
This is created when everybody understands the value of working safely.
Safety Culture
200
What is the rating No. for a welders face-mask?
4
200
What are some ways to maintain our PPE? What are some examples of PPE?
Clean it Return it to proper storage location Inspect it before and after using Respirator Gloves Hard Hat Proper Clothing Equipment
200
These fires involve ordinary combustibles such as wood or paper. These fires are fought by cooling the fuel. Class ______ fire extinguishers contain water. Using a Class ______ extinguisher on any other type of fire can be very dangerous.
Class A
200
List one of the three types of barricades.
Post and chain Wooden rails Steel cables
300
Authorized
Competent person
300
Always weld and cut in a _____ ______ area.
well ventilated
300
Taking equipment out of service and ensuring that it cannot be operated until a qualified person has removed this device.
Lockout / Taggout
300
These fires involve metals. Class ___ extinguishers contain a powder that either forms a crust around the burning metal or gives off gases that prevent oxygen from reaching the fire. Some metals will keep burning even though they have been coated with this powder.
Class D
300
List the elements of a fire triangle.
Oxygen Fuel Heat
400
Throwing muratic acid on a co-worker.
Unsafe act
400
How should you store oxygen and acetylene tanks?
In the up-right position.
400
A device that provides clean, filtered air for breathing, no matter what is in the surrounding air.
Respirator
400
These fires are near or involve energized electrical equipment. Class ____ extinguishers are designed to protect the firefighter from electrical shock. These extinguishers smother fires.
Class C
400
Fire-extinguisher tags show when the extinguisher was last __________ and __________.
Serviced / Inspected
500
Educating employees about the hazardous chemicals on the job site and how to work around them.
HazCom
500
Before welding, what three things should you check?
Hoses, gauges and work area.
500
You should NEVER do this to your PPE.
Alter it
500
These fires involve grease, liquid, or gases. Class ___ extinguishers contain carbon dioxide (CO2) or another material that smothers fires by removing oxygen from the fire.
Class B
500
What is a lanyard and where can it be found?
lanyard - rope attached to safety harness and anchor point (from above) must not be longer than your distance from the ground