The height at which OSHA requires fall protection for construction activities?
What is 6 feet?
What is the acronym to remember electrical hazards?
What is BE SAFE?
Burns; Electrocution; Shock; Arc Flash/Arc Blast;
Fire; Explosions
What are the three characteristics that are required for a space to be considered a Confined Space?
What is large enough to enter, limited entry & exit openings, and not designed for continuous occupancy?
Ladders should extend ___ above the upper landing.
What is 3 feet
This is the concentration at which an atmosphere is considered by OSHA to be oxygen deficient, that is, it lacks sufficient oxygen to sustain human life.
What is less than 19.5%?
When an excavation reaches this depth, stairs, ladders or ramps must be provided.
What is 4 feet?
Defective ladders should be labeled?
What is, Do Not Use
This is the conductive connection to the earth which acts as a protective measure.
What is grounding?
What percentage of would-be rescuers die in a confined space?
What is 65%?
Who determines the type of soil; the need for cave-in protection; the type of cave-in protection to be utilized and ensures that it is used; and inspects the excavation for safety issues at least once each shift?
Who is the Competent Person for Excavation?
Maximum intended load for self-supporting and non-self-supporting ladders?
What is four (4) times
What is 200 lbs.
In a guardrail system, how much force must the top rail be able to withstand?
What is 200 pounds of force?
What type of space must contain at least one of the following: Hazardous atmosphere (or potential), Engulfment potential, Entrapment potential, Other serious safety/health hazard.
What is a Permit Confined Space?
Two techniques must be used in all excavations going deeper that five feet, according to OSHA, to determine soil type. Classification of the soil is necessary to properly apply cave-in protection techniques. Simple qualitative analytical methods that do not require instrumentation and that are commonly used to determine soil types include:
What are visual examination, the thumb penetration test and the plasticity (ribbon) test?
A non-self-supporting ladder should be set up at __(horizontal distance/working length of ladder).
What is 1:4 angle