Fall Protection
The height at which fall protection is required in Washington state
4 feet
This symptom is a common precursor to heat illness and results from not drinking enough water
Dehydration
Every individual attends this before they can begin working on a jobsite
Safety orientation
How many points of contact need to be on a ladder at all times?
3
The height at which excavations must start shoring, sloping, or benching
4 Feet
The weight an anchor point must support per person
5,000 pounds
At what temperature is it required for workers to take a 10 minute break every 2 hours
90 degrees
This training is required and must be current for at least one crew member employee
First Aid, CPR, AED, Training
What needs to be posted on ladders at all times
Safety stickers
This is required to be worn at all times by an equipment operator
At what height does the top rail of a guardrail have to be?
39" to 45"
What temperature triggers Heat Related Illness prevention methods
80 degress
This person must be utilized whenever equipment is moved through a congested area
A spotter
How far past a landing do extension ladders need to go?
At least 3 feet
What is the leading cause of death in the construction industry
Falls
The "B" in the ABC's of Fall Protection
Body Harness
Clammy Skin, Fainting, and Dizziness are symptoms of what heat illness?
Heat exhaustion
This is typically activated by an airhorn or siren
Emergency Action Plan (EAP)
Extension ladders must be ________ at the top and bottom before climbing.
secured
What dust generated from concrete is dangerous to human lungs?
Silica
These can develop if an individual is suspended from their harness for too long after a fall
Blood clots (suspension trauma)
The number of days it takes to acclimatize to a new environment
14 days
What AQI range is considered JTM's and LNI's Action Level 1
69-100
What ladder material is not safe to use on construction sites?
Aluminum
This is required on all electrical equipment to stop the flow of electricity in the event of a fault
GFCI