Involves cutting the part in a location other than a factory seam.
Sectioning
100
_____________ aptitude involves the intrinsic ability to take things apart and put them back together again.
Mechanical
100
A _________ will set the metallic and prevent mottling
Drop coat
100
The SI unit of frequency, equal t one cycle per second.
Hertz (Hz)
100
The power needed to overcome engine friction
Frictional Horsepower
200
Are undamaged panels off a wrecked vehicle at a salvage yard
Salvage Replacement Panels
200
_____ involves keeping constant airflow out of the nozzle and only triggering paint flow when depositing paint materials on the body.
Spray Gun Triggering
200
_________ is sprayed on with a spray gun and leaves a protective film on the vehicle.
Liquid Masking
200
A temporary magnet made by coiling wire around an iron core; when current flows in the coil the iron becomes a magnet
Elctromagnet
200
Done when force causes movement
Work
300
Are manufactured by smaller companies, not the original equipment manufacture
Aftermarket Replacement Panels
300
While having a discussion, Technician A says that in hot, dry weather, you should use a slow-drying solvent. Technician B says that in cold, wet weather, you should use a fast-drying solvent. Who is correct?
Both
300
Not having the pray gun perpendicular to the panel is called___________.
Heeling
300
The rate at which something occurs or is repeated over a particular period of time or in a given sample
Frequency
300
Compares the cylinder volume with the piston at TDC to the cylinder volume with the Piston at BDC
Compression Ratio
400
Are locations where you must not through parts when making structural repairs
Nonsectionable Areas
400
Paint thickness is measured in _____________.
Mils
400
If a vehicle had been painted and measures more than______ mils, it should be stripped.
10 mils
400
A flow electric charge. In electric circuits this charge if often carried by moving electrons in a wire
Electric Circuit
400
The maximum power developed when an engine is loaded by all accessories
Net Horsepower
500
Are used to add rigidity and strength to structural parts
Foam fillers
500
While having a discussion, Technician A says that cotton clothing is perhaps the greatest source of contamination and should never be worn in a spray booth. Technician B says that lint-free paint suits, rubber form-fitting gloves, a dirt-free head cover, and the appropriate respirator should be worn inside the booth. Who is correct?
Both
500
Can use guide coat while doing body filler work.(Bondo)
True
500
Movement of electricity through a wire or circuit
Current
500
A rating of the turning force at the engine crankshaft