Show:
Characteristics
Operation
Interfaces
LEDs
Troubleshooting
100
The CV-MCU/FOM is virtually identical to this
What is the CV-HTU-16M
100
At power up, this screen is shown on the VT100.
What is the initialization screen
100
This type of cable connects the CV-MCU to the VT100
What is a straight through DB9 serial cable
100
Number of Light Emitting Diodes on a CV-FOM-D
What is 4
100
The name of the BIT that can be ran on a CV-FOM-D
What is Built in Self Test (BIST)
200
This is the number of slots associated with the CV-MCU
What is 2
200
This prompt lets the user know what slot is being configured
What is 1:> or 2:>
200
To connect to a CV-MCU, the baud rate must be set to this on the VT100
What is 9600
200
When power is applied, this color of LED is illuminated
What is green
200
An under or over run condition on the CV-FOm-D will create this error
What is a FIFO-Err
300
This makes it possible to connect tactical cables to the CV-MCU
What is the Tactical Interface Panel
300
What property of a parameter allows the user to enter a portion of that parameter for editing?
What is a unique portion of the parameter name
300
CV-FOMs have a _________ interface, enabling them to be removed without removing power
What is hot-swappable
300
If the yellow LED is illuminated, the CV-FOM-D is in this condition
What is a loopback
300
A troubleshooting tool that can be used to check a connection to another device
What is a loop back
400
This is the weight of the CV-MCU with 2 CV-FOM-Ds
What is 9 pounds
400
The CV-FOM uses this to store configuration parameters
What is flash memory
400
This is the part of an Unbalanced CDI connection that is associated with the Rx Data In signal
What is the CX-11230 "pin"
400
The two conditions that make the Data Loss LED illuminate
What is Loss of Frame (LOF) and Data Fail
400
The alarm type and number of alarms is stored in this menu
What is the Statistics > Alarms menu
500
This is the power comsumption for the CV-MCU
What is 30 watts
500
These options are available under the TxClkSrc parameter menu
What is DCE-Src and DTE-Src
500
In fiber optic cabling, this is what "ST" stands for
What is Stick and Twist
500
It illuminates when power is applied to the CV-MCU
What is the power switch
500
The number of tests that are conducted when a BIST is executed
What is 164