This system uses a body harness & lanyard to stop a worker in the event of a fall
What is a fall arrest system
These are the two types of eye protection commonly used on construction sites
What are safety glasses and goggles
This device is used to monitor oxygen levels & detect toxic or flammable gases before and during entry into confined spaces
what is a multi gas meter
This must always be attached to a lockout device to provide information about the lockout condition
what is The Tag
This document provides detailed information about a hazardous chemical, including its properties, health effects, and safe handling procedures.
What is a Safety Data Sheet (SDS)
What are the different types of fall protection and what is their purpose?
Fall Prevention- this PREVENTS the fall from happening
Fall Arrest -WHEN you fall, this is going to catch you.
Respirators are required when airborne contaminants exceed these workplace limits
what are permissible exposure limits
These are the roles that are involved in a confined space entry
What are the Entrant, Attendant, Supervisor
During group Lockout Tagout, this person is responsible for ensuring all locks are removed after the job is completed
what is
The authorized employee
This set of labels and symbols is used worldwide to standardize chemical hazard communication
What is Globally Harmonized System (GHS)
In addition to arresting a fall, this component of a personal fall arrest system helps reduce the force exerted on a worker's body during a fall
What is a shock absorber
This class of hardhat provides protection from both falling objects and electrical shock
what is Class E hardhat
Before entering a a permit-required confined space, this must be completed to identify potential hazards
What is a Hazard Assessment
True or False
an energy-isolating device is required to physically prevent the release of hazardous energy
TRUE
-Energy isolating devices like switches, valves, or circuit breakers must be used during LOTO
This Signal word on a chemical label indicates the most severe level of hazard.
What are the A+B+C and D of fall protection
A - Anchorage
B - Body Supports
C - Connectors
D - Deceleration device
Gloves made from these two materials provide protection against electrical shock
What are rubber and leather
This is the minimum acceptable oxygen level for safe entry into a confined space.
what is 19.5%
This is the first step in the lockout/tagout process
What is shutting down the equipment
What is the differences between the GHS and HazCom
What is
(GHS) (Globally Harmonized System) is an international system developed by the United Nations to standardize chemical hazard classification and communication.
HazCom (Hazard Communication Standard) is a U.S. OSHA regulation Standard to inform and protect workers of chemical Hazards in work place
The total fall clearance distance is calculated by adding these three factors
What are
1. Free fall distance
2. Deceleration distance
3. Worker's height
what are the 5 steps in the hierarchy of controls?
2.Substitution (replace the hazard)
3.Engineering controls (isolate people from hazard)
4.Admin controls (change the way people work)
5.PPE
Before entering a Permit-required confined space, workers must complete this process to isolate energy sources and prevent unexpected equipment activation.
what is LockOut/Tagout
this form of energy exists in moving parts such as gears, belts, and shafts
what is kinetic energy
These visual symbols on chemical labels communicate specific hazards like toxicity, flammability, and environmental danger
What are hazard pictograms