DC LOK

HAND WHEEL COLORS

100

This fluid is carried by a piping system having hand wheels colored red.

What is firemain.

200

This fluid is carried by a piping system having hand wheels colored dark striped red and dark green.

What is Finished Foam Discharge plugs (AFFF)

300

This fluid is carried by a piping system having valve hand wheels colored dark green.

What is Sea Water

400

This fluid is carried by a piping system having hand wheels colored yellow and black.

What is Lube Oil

500

This fluid is carried by a piping system having hand wheels colored light purple.

What is JP-5

DC FITTINGS

100

Air escaping from an air test fitting could be an indication of this kind of damage.

What is flooding

200

This is the maximum time a fitting can be logged open in a DC Closure Log.

What is 24 hours. 

300

This section of the damage control book lists all the DC fittings and their closure identifications.

What is Damage Control System

400

Compartment air test fittings are normally classified as this type of fitting.

What is X-Ray.

500

These are the three pieces of information listed next to each DC fitting on a CCOL.

What is Compartment name, WCS, Division LCPO

CHEMICAL RADIATION

100

This chemical agent causes destruction of the skin and tissue

What is blister

200

M-8 paper will detect this form of chemical agent.

What is liquid

300

This is the number of Auto-injectors of Atropine and 2-PAM Chloride are issued to each person at the threat of a chemical attack.

What is 3 each

400

Chemical agent most heavily contaminate these areas.

What is inside, horizontal surfaces

500

These two colors are the primary and secondary colors for a biological contamination marker

What is blue and red

PIPE PATCHING

100

This is the first step in performing a pipe patching procedure.

What is secure the pressure to the pipe

200

This is the maximum pressure allowable on a soft patch.

What is 150 PSI

300

The rubber gasket material must extend at least this many inches past both side of the rupture when installing a soft pipe patch.

What is 2 inches

400

These are the three common pipe patches used in the Navy.

What is Soft patch, Jubilee, and EWARP

500

This is the reason you remove and cut wedges prior to reinstalling them for final application of a soft patch.

What is to minimize obstruction of fluid flow

SHORES

100

These are the most utilized types of shoring.

What is H,I,K

200

These are two sizes of metal shoring used onboard Navy ships.

What is 3-5 feet and 6-11 feet

300

This is the maximum length of a shore.

What is 30 times the minimum thickness

400

K type shoring needs the V angles to less than this many degrees.

What is 90 degrees

500

This is the name of the plate placed under a shore to distribute weight or pressure.

What is shole