General Hazards
Wearing proper footwear can prevent..
Slips/Trips/Falls
In case of a Fire, when do we leave the building?
Immediately
NOW
ASAP
How many points of contact need to be on a ladder at all times?
3
Three
Who must verify the risk assessment for working at height?
A) The operational manager
B) The safety officer
C) Data Center Health and Safety (DCHS)
D) The equipment manufacturer
C) Data Center Health and Safety (DCHS)
Nothing can ever happen to us so being prepared is irreverent
That is very False. Complacency makes it worse.
How can we reduce risk from Insect/critter bites and stings?
Wear long sleeves/gloves
Stay away from nests/hives
Be educated on local procedures and hazards
True or False:
In the event of a fire, we should gather our belongings before exiting the building.
FALSE
If our coworker/manager says placing a ladder on an uneven surface is fine because it will be a quick and easy job... then it's fine right??
Respectfully... that's wrong. We will have backbone (disagree & commit) and tell them that it must be on a stable surface.
What must be confirmed about the body harness and connector?
A) They are brand new
B) They are from the same manufacturer
C) They are different colors
D) They are made of the same material
B) They are from the same manufacturer
What are some actions we can take in the workplace to be prepared for unexpected events/emergencies?
Drills, SOPs, rehearsals, plans, first aid/CPR training, etc...
A brief discussion as a group about this is welcomed.
What does OSHA stand for?
Occupational Safety and Health Administration
True or False:
In the event of an electrical fire, plain water is best to put it out.
FALSE
(it will make it worse)
(foam or powder extinguishers)
Do ladders need to be inspected and certified to use?
Yes
Where should the "D" ring be positioned on the body harness?
A) On the chest
B) On the lower back
C) In the middle of the shoulder blades
D) On the hip
C) In the middle of the shoulder blades
What strength must a PFAS have in relation to the potential impact energy of an employee free-falling?
A) Equal to the impact energy
B) 1.5 times the impact energy
C) Twice the impact energy
D) Three times the impact energy
C) Twice the impact energy
If it's cold outside you can't get dehydrated or get heat injuries so it's best to work in the cold.
Share thoughts on this statement.
What is: That is very false.
Explain steps to operate fire extinguisher
Pull
Aim
Squeeze
Sweep
(bonus if you know to ensure the type of fire extinguisher for which type of fire)
When must a PFAS be used?
A) Only when working above 10 feet
B) Only during daytime hours
C) At all times when working at height or moving between height locations
D) Only when a supervisor is present
C) At all times when working at height or moving between height locations
What must be done with the PFAS straps?
A) Left loose for flexibility
B) Adjusted based on the weather
C) All straps must be tight
D) Only leg straps need to be tight
C) All straps must be tight
What is the maximum deceleration distance a PFAS must limit an employee's travel to?
A) 3.0 feet
B) 3.5 feet
C) 4.0 feet
D) 4.5 feet
B) 3.5 feet
True or False: Dan is the OSHA master
What is true. Some may even say that Dan is the OSHA GOAT.
Difference between type A,B,C,D fires
Class A: Fires that involve ordinary combustible materials like wood, paper, fabric, and some plastics. These are the most common type of fire.
Why do we use fiberglass ladders vs metal ones?
Doesn't conduct electricity like metal
What is the maximum arresting force a PFAS must limit on an employee?
A) 1,600 pounds
B) 1,700 pounds
C) 1,800 pounds
D) 1,900 pounds
C) 1,800 pounds
What must individuals confirm before using a PFAS?
A) An approved procedural document is in place
B) The weather conditions are suitable
C) A supervisor is present
D) The work area is cordoned off
A) An approved procedural document is in place