Aircraft Drawings
A specific measured distance from the datum or some other point identified by the manufacturer, to a point in or on the aircraft is called a:
station number.
To locate a certain point (a measured distance) on an aircraft; these are used:
Station numbers
A hydraulic system schematic drawing typically indicates the:
direction of fluid flow through the system.
Aircraft bolts are usually manufactured with a:
class 3 fit for the threads.
What's the easiest building to lift?
A lighthouse.
For sketching purposes, almost all objects are composed of one or some combination of six basic shapes; these include the:
triangle, circle, cube, cylinder, cone, and sphere.
To find a point on a drawing, or to locate a part on a drawing; these are used:
Zone numbers
Schematic drawings are used for which of the following?
Trouble-shooting the system
An accepted rule of thumb for installing bolts in an aircraft structure is to have the bolt head:
Up, or in a forward direction
What did the buffalo say to her son on the first day of school?
BI SON
What is the class of working drawing that is the description/depiction of a single part?
Detail drawing
Station numbering means:
A specific measured distance from the datum to a point in or on the aircraft
A pictorial electric diagram:
Shows a pictorial sketch instead of electrical symbols
The sacrificial part in a bolt assembly used to mount a part is the:
Washer
Why do ducks have feathers on their tales?
To hide their butt-quacks.
Sketches are usually made easier using:
graph paper.
Which statement is true regarding an orthographic projection?
One-view, two-view, and three-view drawings are the most common.
The drawings often used in illustrated parts manuals are:
Exploded views
Which type of wrench should be used whenever possible?
Box-end wrench
What do you call an airplane that flies backward?
A receding airline.
What material symbol is frequently used in drawings to represent all metals?
Cast iron.
When sketching
The sketch needs to be as detailed as it needs to be for fabricating the part
What type of diagram shows the wire size required for an installation?
A block diagram.
What type of tap is used to start threads in a hole or to tap through a hole?
A taper tap
How often do airplanes crash?
Just once