SEAMS/ALLOWANCES
IDENTIFY THE FOLLOWING SEAM
WHAT IS A GROOVE SEAM
THE FIRST DIGIT IN A POP RIVET CODE REPRESENTS THIS:
WHAT IS MATERIAL TYPE
THIS IS THE PART OF THE FIRST HALF GORE THAT IS REQUIRED TO CALCULATE FOR A STRETCHOUT OF THE HEIGHT
WHAT IS THE CENTRE LINE
THE PRIMARY PPE WHEN USING A SPOT WELDER
WHAT ARE SAFETY GOGGLES
THIS IS THE PROTECTIVE LAYER THAT FORMS ON STAINLESS STEEL
CHROMIUM OXIDE
THE TOTAL ALLOWANCE FOR A 3/4" DOUBLE HEM:
WHAT IS 1 1/2"
THIS IS GRIP RANGE
WHAT IS THE AMOUNT OF MATERIAL THICKNESS A RIVET CAN FASTENETER
THIS IS THE FORMULA TO CALCULATE THE NUMBER OF HALF GORES IN AN ELBOW
WHAT IS (#OF PCS x 2) - 2
THE PRIMARY PPE WHEN WORKING AROUND STAKES
WHAT ARE SAFETY BOOTS
THIS IS WHAT KEEPS THE TIPS OF A SPOT WELDER IN PLACE
WHAT IS A TAPER/FRICTION FIT
THE TOTAL ALLOWANCE FOR A PEANED EDGE
WHAT IS 3W
DYLAN'S DAILY DOUBLE
WHEN FASTENING AN 8" ROUND FITTING WITH A MAX SPACING OF 3", YOUR EXACT SPACING BE BETWEEN FASTENERS WILL BE THIS
WHAT IS 2 13/16
WHEN CALCULATING THE CENTRE-LINE HEIGHT YOU USE THIS TRIGONOMETRY FUNCTION
WHAT IS THE TANGENT
WHEN WORKING WITH A POWER ROLLER, YOU SHOULD NOT BE WEARING THESE TWO THINGS
WHAT ARE GLOVES AND LOOSE CLOTHING
DREW'S DAILY DOUBLE
THIS IS THE CUT SIZE OF A 14" SMALL END PIPE WHEN USING 1/16" MATERIAL
43 9/16"
THIS IS THE MAXIMUM STATIC PRESSURE ON A BUTTON LOCK FITTING (without screws)
WHAT IS 3" STATIC PRESSURE
WHEN FASTENING COPPER WITH A 1/4" RIVET YOU MUST ALLOW FOR THIS MUCH DISTANCE FROM THE EDGE ON ONE SIDE:
WHAT IS 5/8"
THE ANGLE OF THE FIRST HALF GORE ON A 75 DEGREE 5 PIECE ELBOW IS
WHAT IS 9.375 DEGREES
THIS SAFETY DEVICE ON A POWER BREAK, WHEN INTERRUPTED, PREVENTS IT FROM UNWANTED MOVEMENT
LASER BEAM
THIS IS WHAT YOU DO TO EACH LEG WHEN DOING A SHARP BEND EQUATION FOR AN ID ANGLE
ADD 20% MATERIAL THICKNESS
THE TOTAL ALLOWANCE FOR A HAND FORMED PITTSBURGH WITH A 5/8" LOWER BENDING LEAF
WHAT IS 1 1/2"
ON A LONGITUDINAL CONNECTION ON A ROUND FITTING IF THERE ARE 8 SPACES YOU WILL HAVE THIS MANY FASTENERS
WHAT IS 9 FASTENERS
DAVES DAILY DOUBLE:
DETERMINE THE CUT SIZE OF THE FOLLOWING ELBOW:
WHAT IS 13 5/16" x 15 3/4"
WHAT ARE EAR PLUGS
THIS IS WHAT HAPPENS TO THE CIRCUMFERENCE OF AN ELBOW WHEN IT IS CRIMPED
THE CIRCUMFERENCE INCREASES