GENERAL
ELECTRICAL
DATA
SITE SPECIFIC
POTPOURRI
100
Any employee who is injured, over exposed to a hazardous agent, or involved in an event, or near miss during work shall promptly report the event to this person.
What is SUPERVISOR or PERSON IN CHARGE ? G1.05
100
These shall not be worn by employees while setting poles,or doing other groundwork.
What are CLIMBERS? E2.23
100
The square knot reduces the rope efficiency by this much.
What is 50%. Data3.11
100
All device controls dispatched abnormal for a hold order, shall be tagged with one of these.
What is HOLD TAG? SITE 3.B.2
100
These shall be constantly attended or appropriately guarded (that is , by standard railings, toe boards, covers, or barriers).
What are FLOOR and WALL OPENING HAZARDS? G2.10
200
These shall not be strung across aisles or walkways where people may trip or fall over them.
What are UNPROTECTED ELECTRICAL CORDS, WIRES, or CABLES? G2.04
200
Before starting work on _________, the possibility of unplanned back-feed, abnormal voltage, or other dangerous conditions shall be eliminated.
What is TRANSFORMERS? E3.07
200
This is the hand signal "for raise the boom".
What is THUMB POINTING UP with CLOSED FINGERS. Data3.24
200
When isolating a ________ transformer for CLEARANCE, it is not necessary to islate its station service and/or potential transformers unless they are tied to other facilities in the station.
What is MOBILE ? Site 3.A.3.d
200
Before dismantling apparatus associated with compressed gas cylinders, the what shall be relieved from the apparatus.
What is GAS PRESSURE? G3.28
300
Temporary circuits used to operate hand tools and equipment shall be protected by this.
What is circuit-interrupting device(GFCI)? G4.06
300
If a breaker fails to fully ____ or fully _____, the breaker shall be isolated by de-enegizing the feed bus.
What is OPEN and CLOSE? E3.21
300
Makeshift links or fasteners formed from bolts or rods, or other such attachments, shall not be used on these.
What are STEEL ALLOY CHAIN SLINGS? Data3.21
300
All primary voltage ________ with operating rods will be locked with company locks.
What are SWITCHES? Site 5.E.2
300
Employees shall not wear these while working with energized equipment. (name 2 )
What are watches with metal bands, oversized belt buckles, or jewelry. G1.21
400
Employees who are exposed to the hazards of ______ and ______ ______ shall not wear clothing that could increase the extent of the injury.
What is FLAMES and ELECTRIC ARC ? G1.20
400
________ and _________ furnished with insulating gloves shall be used only with insulating gloves and no other time.
What are PROTECTORS and INTERLINERS? E1.10
400
Slings, all fastenings, and attachments shall be inspected before use and during the shift as circumstances warrant. In addition a more thorough inspection shall be made and documented at least ______.
What is ANNUALLY? Data3.24
400
All personnel entering and working in station control houses that contain Critical Cyber Assets must understand and adhere to the associated NERC _________ _________ _________ (CIP) Standards and business unit policies and practices.
What is CRITICAL INFRASTRUCTURE PROTECTION? Site 1.C.3
400
Do not perform bare hand work during the progress of a what in the immediate vicinity.
What is ELECTRICAL STORM? E2.47
500
Employees shall select appropriate hand protection when exposed to hazards such as...... (name four)
What are skin absorption of harmful substances; cuts or lacerations; abrasions; punctures; vibration; chemical burns; thermal burns; and/or harmful temperature extremes? G1.17
500
Whenever possible, these shall be placed at the point of work. If this creates congestion and is a hazard to workers, they shall be placed as near as possible to the work being performed.
What are GROUNDS? E 2.41
500
These words spell JULY in the phonenic alphabet.
What are JULIET, UNIFORM, LIMA, and YANKEE? Data5.01
500
These are the responsibilities before releasing an opeating order. (name two)
What is CONFIRM in the CLEAR, EQUIPMENT READY FOR SERVICE, GROUNDS REMOVED,and EXCEPTIONS. SITE 3.D.5
500
This shall be used when installing and removing cover-up on all energized conductors and equipment.
What are PIPE or LIVE-LINE TOOLS? E2.16