Show:
Who Am I
General Safety Lee, Info
Operations
Really tough stuff
Rules/Etc
100
I am used to create a round hole in material
What is drill press
100
i turn clock wise
What is right hand drill bit
100
i am perfect, there is nothing wrong with me
What is a reamed hole
100
when reaming, i am the fraction used to determine the correct size drill bit
What is 1/32
100
i had better be in place or do not use the machine
What is a guard
200
like a bee bopper, i have the "twist" to make around hole
What is twist drill
200
if you have a broken screw us me to get it out
What is left handed drill bit
200
use me when a bolt head has to sit flush
What is counterbore
200
i am the first thing to consider when figuering counterbore finished diameter
What is bolt head diameter
200
drill bits and taps and all cutters are this way, you had better be careful or i will cut you
What is sharp
300
use me first so the hole is in the correct location
What is center drill
300
i will burn up a drill bit in a hot minute
What is speed or drill bit rpm
300
yes yes yes, a screw head is up to high and needs to be lower
What is a counter sink
300
do not forget about how big i am when figureing counter bore finished diameter
What is socket diameter
300
i am turning so do not touch me, i can rip you arm clean off
What is revolving parts
400
don't hold me with your foot, but you can carry me anywhere to drill a hole
What is a hand drill
400
i am the more expensive drill bit
What is a left handed drill bit
400
i really need some threads in me
What is tapped hole
400
i am the other measurement of a counterbore, i am not the diameter
What is bolt head thickness
400
never stop the drill chuck with this, you may need it for something, like picking your nose
What is you hand
500
i am way to short to sit on the floor
What is bench top drill press
500
because you turned the bit to fast you have now done this to the material
What is work hardened
500
i am round and i go all the way through
What is drilled hole
500
all of us, reaming, counterboring, countersinking, and tapping, move at the same speed
What is to turn slow
500
remove me with a brush
What is chips