Show:
Baseline Runs
Winpep 7
Loading
Diagnostic Runs
DynoJet Dynos
100
These are the two types of baseline runs.
What are Roll On and All Gears?
100
This is the icon we click after selecting a run folder.
What is the checkered flag icon?
100
This is the first step in the loading process.
What is a 360 inspection?
100
This run is used the check throttle response of a CV carb.
What is a fast acceleration run?
100
This was the family that brought us the DynoJet Dyno.
Who are the Dobeck brothers?
200
This run is used to get an overall perfomance of the motorcycle.
What is a roll on run?
200
We click this icon to set our parameters for our run.
What is the wrench icon?
200
This is the second step in the loading process.
What is clamp and strap the front wheel in the cradle?
200
This run can be used to help pinpoint engine or driveline mechanical problems.
What is a negative 1 horsepower run?
200
In this year Dynojet introduced the 1st dyno the model 100.
What is 1989?
300
This run is started in 2nd gear.
What is an all gear?
300
These are the 4 firing order choices we can choose from.
What is 90, 180, 360, & 720?
300
This is the third step in the loading process.
What is center the axle front to back?
300
A roll on is the basis for these runs.
What is negative horsepower runs?
300
This model Dyno introduced the Eddy Current Brake.
What is the model 250?
400
Using a six speed motorcycle we do a roll on in this gear.
What is fourth gear?
400
This is the tire speed that winpep 7 defaults to.
What is 200mph?
400
This is the fourth step in the loading process.
What is center the wheel left to right on the drum?
400
At the end of this run we pull the clutch in for 5 seconds before pushing the red button.
What is a negative 2 horsepower run?
400
This model Dyno added the air/fuel module.
What is the model 200?
500
This is the minimum temperature for liquid cooled bikes to be at before beginning any baseline run.
What is 150 degrees fahrenheit?
500
This is the altitude used for YTI MTC.
What is 465'?
500
We need this to measure RPM.
What is the inductive pickup?
500
After beginning sampling and slowly accelerating from 3,000 to 5,000 RPM we deccelerate to this RPM before going to full throttle.
What is 4,000 RPM?
500
This model Dyno was the first to use a windows based program.
What is the model 150?