Brakes
This item wears down after frequent use, and sometimes will begin to squeal. If they are too thin you will FAIL your auto inspection.
BRAKE PADS
The colored finish that is to be brushed onto wood and wiped with a rag is called..
STAIN
The small plug that goes in the top of the head, that creates spark inside the combustion chamber is called a _________
spark plug
SMAW stands for...
Shielded Metal Arc Welding
1/2" + 1/2"=
1"
What is the name for the part that houses the brake pads?
Brake Caliper
The finish that smells like apple cider is called...
**Hint it is made from the secretions of beetles.
SHELLAC
An engine that completes its cycle in 4 up and down motions is called....
4 stroke or 4 cycle.
AC is and abbreviation for...
Alternating Current
the smallest mark on a tape measure is often a...
1/32"
When a braking system is operated by HYDRAULIC brake fluid, it is called a _____________ brake system.
Hydraulic
Boiled ______seed oil is a good finish for something that will not receive a lot of wear and tear.
Boiled Linseed Oil
An engine that has no valves and completes its cycle in two up and down motions is called a ....
2 stroke or 2 cycle.
A wide weld pattern that often results in a fancy looking weld is called a ....
Weave
1/8" + 1/8" =
1/4"
When there is air in your hydraulic brake line, you can remove the air by _______________ the brakes.
Bleeding
If you are using an oil based paint you must clean the brush with...
A solvent based cleaner such as paint thinner, lacquer thinner, etc.
The part inside the cylinder that moves up and down with the force of combustion is called a ....
Piston
Draw the welding symbol for a fillet weld on the other side.
How many 1/16ths in 1 inch.
16
The brake system that is used in the rear end of cheaper smaller vehicles today is called....
HINT: it is cheaper to manufacture but has many more moving parts and can be harder to maintain.
DRUM BRAKES
Out of all the finishes you have used this year, which finish would be BEST for use on a stair set?
Polyurethane
Fill in the blank:
Intake, ____________, Power, Exhaust.
Compression
A weld that requires prep by cuttin a groove in the metal is called a...
Groove weld
5/8"