What color barricade tape is used for a danger area?
Red
Who is required to have cut-resistant gloves on them at all times?
Everyone
What color is used for lockout tagout locks?
Red
All containers with chemicals in them must have THIS, to identify what is in the container.
Labels. All containers must be properly labeled.
What type of permit is required when performing work that produces a flame and/or sparks?
Hot Work Permit
What color of barricade tape is used for a caution area?
Yellow
What PPE is required when a fall hazard of 4' or greater is present?
Fall Protection - Full body harness and lanyard
True or False - Anyone who operates, cleans, or maintains manufacturing equipment is required to carry a minimum of 2 locks, specifically used for LOTO at all times.
True
What must be used when using chemicals to clean an area, to warn and keep people out of the area being cleaned?
Barricade Tape
Who's responsibility is it to observe the hot work being performed and be ready with a fire extinguisher?
Fire Watch
When do you use Red Barricade tape?
For an area posing a safety hazard that poses a life threatening, serious, or severe injury risk.
In addition to a face shield, what PPE is required to protect your eyes when handling chemicals?
Goggles
After locking out a piece of equipment with lockout devices and locks, you must do what to the equipment to verify it will not run?
Try to start it
Where can you find information related to a chemicals hazards, storage requirements, first aid measures, and other relevant information?
Safety Data Sheet (SDS)
How long must a fire watch monitor the area continuously from the time hot work is completed?
1 continuous hour
When do you use the yellow barricade tape?
When a hazard is present but is NOT seen as immediately life threatening or at risk for serious or severe injury.
What should you do with PPE before wearing it?
Inspect it
If someone forgot their locks and keys, is it ok to lend them yours to use?
No!
If you are exposed to a chemical, what should you use as a means for first aid?
Rinse in a safety shower/eyewash station.
Who is responsible for ensuring the Hot Work Permit is fully complete, and inspect the area after hot work is finished?
Hot Work Manager
Name 3 examples of when barricade tape is needed?
Grate pulled up, L6 foaming, overhead work/lift, electrical hazard, missing guard rails, excavation, construction, maintenance work that produces housekeeping hazards.
When entering the fryer danger area, what PPE is required?
Fryer Bibs, Fryer Jacket, Fryer Hood, Fryer Gloves, Face Shield, Goggles, Rubber Boots
When applying lockout to a machine, what are the 5 steps in order?
1. Notify affected personnel
2. Properly shut down machine
3. Isolate all energy sources
4. Apply lockout devices, locks and tags
5. "TRY" - Verify total de-energization of all sources
What PPE is required every time you are handling chemicals?
Bibs, Jacket, Hood, Face Shield, Goggles, Gloves, Boots
How often must a Fire Watch spot inspect the hot work area for an additional 3 hours after continuous monitoring has been completed?
Every 30 minutes.