Engine Instruments
Master Warning
Chip detectors
100

where is the rotor overspeed switch located?

nose compartment.

100

What causes your LOW ROTOR RPM capsule to illuminate?

Rotor speed is below 95% RPM.

100

What work package would you find description and data/ theory of operation for the main XMSN and gearbox chip detector system?

WP 0024

200
What causes HYD PUMP 2 FAIL to illuminate on MFDs?

Right hydraulic pump output pressure is 1950 to 2050 psi.

200

What work package would you find description and data/ theory of operation for the Master Warning system?

WP 0033.

200

How many XMSN chip detectors are installed on the UH60M?

4.

300
What does the EICAS consist of?

Pilot's and Copilot's outboard MFD's, Pilot's and Copilot's inboard MFD's, and the NO.1 Data Concentrator Unit(DCU) and NO.2 DCU.

accpetable answer all MFDs and DCUs

300

Warning signals from EICAS and the stabilator are routed through what Line replaceable Unit (LRU)?

Left Relay Panel.

300

What test page on your FMS allows you to initiate a chip detector BIT?

DCU test page.

400

All engine and subsystem sensor signals monitored by the EICAS are applied to?

No.1 and No.2 DCUs

400

What provides a ground to the Copilots master warning panel?

TJGC25 ref:schematics sheet 1

400

What are your XMSN chip detectors on your UH60M?

Accessory Module and Input Module chip detectors.