Safety 1
Insulated Conductors
Anchors & Fasteners
Conductor Installation
Miscellaneous
100

This is the most common shock-related injury.

Burns

100

The most widely used conductors for electrical systems are rated at this voltage.

600 V

100

What type of aggregate is mortar made with?

Sand

100

What is a pinch point?

Anywhere it is possible for a part of the body to be caught between moving parts or between moving parts and stationary parts

100

What symbol denotes an isolated ground receptacle?

Orange triangle

200
Whenever an entry rescue must occur, this worker must be stationed outside the permit space to call for help if necessary.

Attendant

200

This is the innermost part of a medium voltage cable.

The conductor

200

This type of hollow wall anchor has the lowest duty rating.

Plastic

200

What is the first thing that should be done as soon as the cables have been pulled?

Secure them

200

Which occupancy classification in the IBC contains prisons and nursing homes?

Institutional

300

A worker who is authorized by the entry supervisor to enter a permit space is called ___.

An authorized entrant

300

Name a type of wire that has thermoplastic insulation.

THHN/THWN

300

What is the most important step when fastening something to a brick facade wall?

Anchoring the item to the main structure and not the brick facade.

300

When a raceway is underground, it is considered this type of location.

Wet location

300

What are the three sides of the fire triangle?

Detection, suppression, containment

400

What is the key safety difference between an aerial lift and a scissor lift?

OSHA requires the use of harnesses and lanyards on aerial lifts at all times, but not on scissor lifts.

400

How is a grounding conductor identified?

Green or bare

400

What is the force that holds mechanical masonry anchors in concrete?

Friction

400

Larger cable pullers typically have a continuous pulling force rating of up to ____ pounds at peak.

10,000 

400

What are the five primary methods of terminating a wiring device?

1. Back wire

2. Side wire

3. Speed wire

4. Pre-terminated leads


5. Modular
500

Name two factors that determine the severity of an electric shock.

1. The amount of current flowing through the body

2. The current's path through the body

3. The length of time the body spends in the circuit

4. The current's frequency

500

Name one difference between armored cable (AC) and metal clad cable (MC)?

MC cable has a dedicated ground wire, where AC depends on the metal sheath and inner bonding strip

MC is more versatile and can be used outdoors when rated appropriately 

AC is less flexible than MC


500

What are the two varieties of post-installed concrete anchor?

Male and female

500

What are four installation parameters should be considered when installing cables into conduit or cable tray?

1. Clearance

2. Jamming

3. Sidewall pressure

4. Max pulling tension

500

A listed through penetration that identifies a specific manufacturer's caulk can be installed using a different brand of caulk as long as what requirement is met?

The complete through penetration must be tested and listed with the other manufacturer's caulk