SAFETY EQUIPMENT
What is a piece of equipment that protects you from electric shocks?
What is the first thing you should do before working on any electrical equipment?
Turn off the power.
What is the main risk of working with live electrical wires?
Electric shock.
What is the first thing you should do if someone receives an electric shock?
Turn off the power.
What term describes the flow of electric charge?
Electric current.
What equipment do you need to avoid inhaling toxic fumes?
A Mask
What procedure ensures that no one can accidentally turn on electrical equipment while maintenance is being performed?
Lockout/tagout.
What hazard can occur if electrical equipment overheats?
Fire.
In case of a fire caused by electrical equipment, what should you use to extinguish it?
A Class C fire extinguisher.
What do we call the force that pushes electric charges through a circuit?
Voltage.
What should you wear on your head to protect yourself from falling objects
A safety hat.
What should be used to verify that there is no electricity running through the wires before starting work?
A voltage tester
What can happen if you don’t wear insulated gloves when handling live wires?
You can get an electric shock.
What should you do if you find an electrical cord that is frayed or damaged?
Report it and remove it from service.
What is the term for a device that limits the amount of current in a circuit?
Resistor.
What specific type of glove should you wear when working with live electrical wires to prevent electrical shock
Rubber-insulated gloves.
What is the procedure called that involves testing for residual energy in an electrical system even after the power is turned off?
Verification of zero voltage (or test for de-energization).
What could happen if you do not properly ground electrical equipment?
ou could cause an electrical fault or shock.
What is the procedure to follow if a worker is exposed to a chemical while performing electrical work?
Follow the safety protocol and provide first aid as needed.
What is the name of the pathway that allows electricity to flow?
Circuit.
What two pieces of equipment should be used together to prevent falls when working at heights?
A safety harness and a lanyard.
What step must be taken to ensure all stored electrical energy is discharged before performing maintenance on high-voltage equipment?
Discharge capacitors or follow the energy isolation procedure.
What long-term health issue can result from repeated exposure to electrical arc flashes?
Permanent eye damage or burns.
What should you do if you hear a continuous alarm while working with electrical equipment?
Evacuate the area immediately and follow emergency protocols.
What do we call the device that converts electrical energy into mechanical energy?
Electric motor.