WATCHSTANDING
ELECTRICAL
GEN LOK
3M
DC
100

How often must a watchstander visit a manned space?


Once every 60 min.

100

TRUE/FALSE

Electrical System on the ship is grounded?

FALSE

100

What is considered a legal record?

Engineering Log

100

What type of spot check is used to validate preventive maintenance that has been completed?

Historical

100

The Jubilee patch will hold up to ....... psi.

100 psi

200

What term indicates a condition or action witch should have been done previously, however, when not accomplished must be preformed prior to continuing the procedure.  

"Ensure"

200

What NSTM deals with general electrical plant guidance?

NSTM 300

200

In accordance with Sec 507 of GEN SPECS, chill water valves are painted .......

striped light blue/dark green

200

How many spot checks must the LPO conduct weekly?

1 per work center

200

What are the two sizes of metal shoring utilized onboard Navy ships?


3-5 feet and 6-11 feet

300

What document can watchstanders find expected minimum duties and responsibilities?

EDORM

300

The ....... disconnects selected nonessential loads from the distribution system in response to an electrical system overload.

load shed system

300

High Pressure air is defined as ....... psig air or greater.

1001 psi

300

Alignment, adjustment, tuning, or testing of operational equipment to ensure performance within published maintenance card or technical manual procedures is referred to as .......

Preventive Maintenance 

300

What are the two types of Navy Firefighting nozzles used onboard ships?

All Purpose and VARI

400

Watch supervisor should review OPLOGS _____and chain of command should review _____?

Hourly and Daily

400

What disconnects the motor from the power supply upon reduction or loss of voltage and keeps it disconnected after voltage returns then it automatically reconnects the motor to the power?

LVR - Low Voltage Release

400

What reduces the rotating speed of the ship's prime mover to a speed suitable for turning the ship’s propeller?

MRG Main Reduction Gear

400

What can be used to ensure all future requirements such as tools, parts, and test equipment are available for maintenance checks?

Forecasting Report

400

What are three colors M-8 paper can display?

Yellow, Green, Red

500

What should the watchstander do if during verification of alignment, discovers a valve in the wrong position?

Notify EOOW and request permission to place in the correct position.

500

What disconnects the motor from the power supply upon reduction or loss of voltage and keeps it disconnected after voltage returns until the operator restarts the motor.  

LVP- Low Voltage Protection

500

The lowest temperature at which a liquid gives off sufficient vapor to form an ignitable mixture is the.....

Flash point

500

Technical PMS discrepancies that could have a detrimental effect on personal safety, safety of ship, or could result in significant equipment damage, are classified as what type of Technical Feedback Report?

Urgent

500

What color is M-8 paper when it is exposed to a G series nerve agent?

Yellow