Forces
This is the force when mass = 50 kg and acceleration = 2m/s^2
100 N
This is the length of the wrench to attain a torque of 12 Nm with an applied force of 60 N on the farther end
l = 0.2 m
The relationship between electric and magnetic fields and their interactions with each other and with electric charges and currents
Electromagnetism
An engineer who designs and maintains roads, bridges, dams, and similar structures
Civil Engineer
This is the gear ratio when the input gear has 10 teeth and the output gear has 5 teeth
1:2
This is the mass of the object experiencing a force = 10 N with an acceleration of a = 5 m/s^2
m = 2 kg
How much torque is needed if the length of the wrench is 0.05 m and the force applied on it on the farther end is F = 100 N?
torque = 5 Nm
The difference between the initial and final position of a point or the weight or volume of a fluid moved or shifted by a floating body
Displacement
A person who uses scientific knowledge to design, construct, and maintain electrical devices
Electrical Engineer
What is the gear called when it is in between the input gear and the output gear
Idle Gear
This is the acceleration of an object its mass = 10 kg and the force acting on it is 10 N
a = 1 m/s^2
How much torque is needed if the length of the wrench is 0.1 m and the force applied on it on the farther end is F = 95 N?
torque = 9.5 Nm
A part of the atom that contains a negative charge and orbits the nucleus
Electron
An engineer who designs other machines inside buildings, such as elevators and escalators
Mechanical Engineer
This is what the system is called when the input gear has 5 teeth and the output gear has 15 teeth
Gear Reduction
This is the mass of the object experiencing a force = 0 N with an acceleration of a = 5 m/s^2
m = 0 kg
This is the amount of force needed to attain a torque of 150 Nm on an item with a wrench whose length is 0.3 m
F = 500 N
The principle in hydrodynamics that states an increase in the speed of a fluid occurs at the same time as its static pressure decreases
Bernoulli's Principle
An engineer who designs and develops methods for extracting oil and gas from deposits below the Earth's surface
Petroleum Engineer
Assuming that the following gears are on a 2 dimensional flat surface, Gear A is directly connected to Gear B, Gear B is also directly connected to Gear C and Gear C is also directly connected to Gear D. This is the rotation of Gear C when Gear A is rotating clockwise
This is the acceleration of an object its mass = 250 kg and the force acting on it is 10000 N
a = 40 m/s^2
This is the length of the wrench to attain a torque of 120 Nm with an applied force of 80 N on the farther end
l = 1.5 m
The upward force on an object in a fluid, equal to the weight of the fluid displaced by the object; the ability or tendency to float in water or other fluid
Buoyancy
An engineer who is responsible for designing, maintaining, and optimizing data infrastructure for data collection, management, transformation, and access
Data Engineer
Gear A has 5 teeth, Gear B has 10 teeth and Gear C has 15 teeth. This is the number of rotations of Gear C when Gear A rotates 6 times
2 rotations