Question set 1
_____ lines are used to identify a surface of an object which has been cut for clarity on a working drawing.
Guide
A note call out is connected to a drawing part with a/an _____ line. ....
Leader
A line is true length if it is _____ to the projection plane in the previous view. ...
Perpendicular
What kind of triangle has one right angle?
Right
Which of the following is true for section lining?
Usually drawn at 45 degrees
Means "slanting" or "inclined"
Oblique
The equipment and devices used in a CAD system are referred to as...
Hardware
CAD software that is loaded on a server and shared by users is...
Networked
When using CAD, which of the following is used to obtain a high quality hard copy of a drawing? ...
Printer/plotter
The offset section is used to best describe...
several features not in a straight line by a single section
Bill of Materials is known as
BOM
Two types of Oblique Drawing are?
Cavalier and Cabinet
On a sectional view, cutting plane arrows should point...
in the direction of viewing
Dimensions on assembly drawings are generally...
not shown
What does the acronym RAM mean?
Random access memory
Divides the circle in half/double the radius
The diameter of a circle
What size should text be in Cad drawing
.125
The scale of the receding axis is usually drawn to the same size in X and Y directions
Cavalier
Dual dimensioning combines...
inch and metric
What is another name for multi view drawing? ...
Orthographic
In CAD, if a file is renamed, the file content will...
Remain unchanged
The primary reason for and auxiliary view is to indicate...
The inclined surface in its true shape and size
Text is to be in _____ on a drawing
Upper Case
The scale of the X & Y receding axis is reduced by one half
Cabinet
Which of the following drawing methods would produce a pictorial type of drawing? ...
Isometric
Which of the following drawing methods would be used to generate a 2D multi-view drawing? ...
Orthographic
When sectioning ribs, webs, and spikes, a ____ section is normally used. ...
Revolved
Which view is usually selected for the front view? ...
The most descriptive
CAD
Computer Aided Design
The only difference between Cavalier and Cabinet
Depth