Show:
SAFETY
WELDING
CARPENTRY
PLUMBING and
ELECTRIC
POWER TOOLS
100
When working with herbicides, the protective equipment that should be worn.
What are safety glasses, or goggles?
100
SMAW
What is Shielded Metal Arc Welding?
100
In framing, the vertical boards are referred to as:
What is a stud?
100
Another name for a "water closet".
What is a toilet?
100
Another name for a jigsaw?
What is a saber saw?
200
When making adjustments to power tools and equipment, this must be done first.
What is unplug or de-energize the equipment?
200
GMAW
What is Gas, Metal, Arc Welding?
200
Another name for sole plate when referring to framing.
What is a base plate?
200
The "ground" wire.
What is the green wire?
200
Name 3 types of drill bits.
What is auger, spade, paddle, jobber, high speed twist, forsner bit?
300
This term refers to neatness and order of the work area.
What is: good housekeeping or a safe and/or orderly worksite?
300
Oxygen hose (color and thread)
What is the green, right-handed hose?
300
1 1/2" by 3 1/2" stud is a called:
What is a 2x4?
300
Sodder should be free of this.
What is lead?
300
A miter saw is best used for this.
What is trim work?
400
The proper angle for setting up a ladder is to place its base a/an ________ of the working length from the wall.
What is a quarter or 1/4th the length of the ladder.
400
Acetylene hose (both color and thread)
What is a red, left-handed hose?
400
length of a 10d nail.
What is 3 inches long?
400
The colors of 3 wire Romex.
What are black, white and green?
400
Compare the purpose of a 80 to 220 grit when used on a belt sander.
What is rough to smooth finish?
500
Used for fighting fire involving oily rags.
What is a Class B fire extinguisher?
500
The #1 in E6010 or E7018 tells us this.
What is the electrode position?
500
The difference between ripping and cutting on a table saw.
What is with the grain and against the grain?
500
GFCI stands for:
What is a Ground Fault Circuit Interrupter?
500
The purpose of a router saw.
What is a saw used to cut dados, grooves, mortises and dovetail joints?