Show:
RAID
RAM
BIOS
Motherboards
OS
100
Which of the following drive configurations uses striping without fault tolerance?
What is RAID 0
100
Which of the following is an error detection technique that can detect errors with only one bit?
What is Parity
100
Which of the following components is necessary to keep the real-time clock running?
What is CMOS Battery
100
Where is the boot priority order for devices kept?
What is BIOS Setup
100
Software installed that understands the chosen device, providing the OS with an interface to the device.
What is Device Driver
200
Which of the following drive configuration uses striping with parity for fault tolerance?
What is RAID 5
200
Which of the following is an error detection technique that can also correct the error?
What is ECC
200
Which of the following components is an example of firmware?
What is BIOS/UEFI
200
How can you find out how many memory slots are populated on a motherboard without opening the computer case?
What is Express BIOS update.
200
Responsible for moving the data between the peripheral devices that it controls, and its local buffer storage.
What is Device Controller
300
Your computer currently runs Windows 7 Enterprise edition. You want to create a RAID 5 array using three newly-installed SATA disks. When you go to Disk Management, the option to create the RAID 5 array is not available. What should you do?
What is Install an add-on RAID controller
300
You have just a built a new system from scratch. You turn the computer on but the system boot fails and sounds a beep code.
What is Memory not installed or detected
300
Which of the following is a general term for the program that holds system information related to the starting of a computer?
What is CMOS
300
How can you find out how many memory slots are populated on a motherboard without opening the computer case?
What is BIOS Setup
300
the easiest way to access all things on your computer.
What is Start Menu
400
Which RAID configuration level provides increased using only two disks?
What is RAID 0
400
You are attempting to boot a new system. The boot fails and the system sounds a beep code. Which of the following describes the most likely cause of this error?
What is Either no memory is installed or the memory was not detected
400
Which of the following could be detrimental while flashing the BIOS?
What is Loss of Power
400
What is the maximum wattage that a PCIe Version 2.0 expansion card can draw?
What is 300 Watts
400
The one program running at all times on the computer
What is Kernel
500
What is an advantage of RAID 5 over RAID 1???
What is Raid 5 improves over Raid 1
500
What type of RAM might slow system performance because it holds memory addresses or data to improve stability on systems with more than 1 GB of RAM before it is transferred to the memory controller?
What is Buffered
500
Which of the following components is a non-volatile memory technology for saving system settings when the computer is powered off?
What is EEPROM Chips
500
Which type of Intel chipset was the first to support processor?
What is Sandy Bridge
500
A computer that manages the Computer Hardware?
What is OS