Show:
Drill Press
Router (Shaper)
Band Saw
Sander
100
If you are caught running or goofing around, you will lose what?
Your shop privileges.
100
What direction do you move the wood when using the shaper?
From RIGHT to LEFT.
100
True or False: It is ok for someone to turn a machine off for you.
FALSE.
100
True or False: The sander is the only machine that you do not need to use safety glasses with.
FALSE. You need safety glasses when using ALL of the machines.
200
What should you do to your work piece before turning on the drill press?
Use a clamp or vice to secure your piece to the table.
200
What device is used to make straight, accurate cuts?
A fence.
200
How high should the band saw guide be above your work piece?
About 1/4 inch.
200
What is General Shop Safety Rule #9?
Never look up from a machine when using it.
300
On the drill press, the chuck is the part that spins the…
Drill bit.
300
At what speed should you move the wood through the shaper?
At a smooth, steady pace.
300
The area around the blade that you must keep your fingers out of is called the…
The 2” margin of safety.
300
When using the disc sander, you should keep the wood against the (left/right) side?
The LEFT side.
400
On a drill press, the chuck is the part that: A. Moves left to right B. Spins and moves up and down C. You must hold on to
B. Spins and moves up and down
400
Why is it important to clean off a machine after you have finished using it?
The next cut made could be off because the sawdust or woodchips are preventing the piece of wood from laying flat on the table.
400
True of False: You should try to feed the wood into the band saw as fast as possible
FALSE
400
True of False: The wood should not be touching the blade (or cutting part) when you turn on a machine.
TRUE
500
Where should the chuck key NOT be when you turn on the drill press?
In the chuck.
500
When using any of the machines, you must be in ______ of the wood (or stock)?
You must be IN CONTROL.
500
The spot (in relation to the user) that no one should be standing in when you are using the band saw.
To the right of the user.
500
What happens if you do not pass the quiz tomorrow?
You don’t get to use any of the machines!