Chapter 11
Tactical Ventilation
Chapter 12
Fire Hose
Chapter 13
Hose Operations & Streams
Chapter 14
Fire Suppression
Chapter 15
Overhaul, Conservation, Preservation
100

Tactical ventilation is performed during fire attack to _______

help control the fire (page 493)

100

What is the part of the coupling that attaches to the hose?

The Shank (page 544)
100

Reduced water volume or pressure from hydrants can often be the result of:

greater demand than the system can provide (page 587)

100

What can happen if excess steam is produced inside the structure as a result of applying water on the fire?

Disruption of the thermal layering (page 670)

100

Which hazard are firefighters likely to encounter during overhaul?

Toxic gases (page 741)

200

This is the primary mode of heat transfer from one compartment to another in a structure fire.

Convection (page 497)

200

Which type of lugs are shallow holes drilled into booster hose couplings that require a special spanner wrench to tighten?

Recessed lugs (page 545)

200

Large volume hose streams created by appliances such as apparatus mounted deck guns are also known as:

Master stream devices (page 621)

200

Aiming a solid stream at the ceiling so the water will rain down and extinguish the fire is known as 

indirect attack (page 678)

200

Rippled wallpaper and peeling paint are possible indications of what?

fire hidden behind the wall (page 743)
300
HVAC units sagging or leaning is an indication of what?

possible roof collapse (page 503)

300

The donut hose roll is advantageous because:

the firefighter controls both couplings (page 557)

300

What can firefighters do to help absorb nozzle reaction when operating a large hoseline?

Lean slightly forward (page 627)

300

On an OS&Y valve, when open where is the treaded portion in relation to the yoke?

The threaded portion of the screw is visible beyond the yoke (page 686)

300
For what purpose are wooden wedges designed to be used during salvage operations?

Stop the flow of water from activated sprinkler heads (page 747)

400

This type of ventilation artificially raises the pressure inside the structure so that smoke and gases move toward lower-pressure openings more quickly

Positive pressure ventilation (page 507)

400

In which type of hose load does the hose lay on its edge in folds that lay next to each other?

Accordion load (page 561)

400

Lower water pressure at the nozzle can be caused by what?

Friction loss (page 627-628)

400

What type of alternative vehicle fuel is colorless, odorless, and has an invisible flame during the day?

Hydrogen (page 704)

400

Unusual glass or metal fragments at a fire scene may indicate what?

the presence of an incendiary device (page 762)

500

What is the purpose of a trench cut?

To create a defensible line ahead of the fire's spread (page 520)

500

Which preconnected hose load has hose folds that are laid into the hose bed in an S-shape?

Triple layer load (page 564)

500

Which type of nozzle is designed for use on fires in confined spaces and has a rotating head that distributes water in a circular pattern?

Cellar nozzle (page 618)

500

Most line of duty deaths at ground cover fires result from what?

heart failure (page 717)

500

If you handle, move, or gather evidence you:

become part of the chain of custody (page 763)