Heavy Construction
These types of nails are used to secure decking and scabs to the timber flooring.
What is 60D nails?
This type of insulation in manufactured in batts and blankets(rolls).
What is flexible?
This type of roof has four sloping sides and is the strongest type of roof because it is braced by four hip rafters.
What is Hip Roof?
Accordion doors should have a rating of what value for flame spread.
What is 25?
These are the three types of metal lath are commonly used for plastering.
What is Expanded metal, expanded rib, and wire mesh?
This alongshore structure is designed to protect the shoreline from erosion.
What is Seawall?
This is a type of heat transfer.
Air, heated by a furnace, becomes less dense and rises, distributing heat to other areas WITH a blower.
What is forced convection?
What is 100 square feet?
These are the types of windows. Name all 3.
What is
1. Double hung windows
2.Casement Windows
3.Stationart Windows
These are two characteristics of ceramic tile determine its classification.
What is Exposure and location?
This is a type of pile driving problem that happens when the hammer is to light.
What is Bouncing?
R-factor represents thermal resistance and this is the most desirable when it comes to R-value.
What is high R-value?
This term is the incline expressed as a ratio of vertical rise to twice the horizontal run.
What is Pitch?
In what subpart will you find where it states employer is responsible for requiring the wearing of appropriate personal protective equipment in all operation where there is an exposure to hazardous conditions or where this part indicates the need for using such equipment to reduce the hazards to the employees.
What is subpart C?
This is the maximum spacing of wire hangers for suspended ceiling main tees.
What is 4'?
This term is used to refer to two or more piles driven in a row, transverse to the long dimension of a structure and fastened together by capping or in some cases by bracing.
What is Pile Bent?
This is the purpose of insulation. Name 1
1. Economy and Comfort
2.Retards the spread of a fire.
3.Prevents excessive condensation.
4.Reduces the amount of noises transmitted to the inside of the building.
This is what must be inspected when inspecting flashing. It must go up the vertical surface and on the roof how many inches.
4" on the the roof.
Fall protection is required where wall openings is _____ feet or more above lower levels and the inside bottom edge of the opening is less than _____ inches above the walking surface.
What is 6 feet and 39 inches?
This is the maximum width of sheet vinyl flooring.
What is 12'?
These are the two main subdivisions of a trestle in bridge construction.
What is substructure and superstructure?
This is how the insulation should be installed with vapor barrier.
What is towards the interior on an exterior wall.
This is the type of nails that is used when laying slate roofing.
What is copper or brace nails?
This is the thickness of the polished plate glass.
What is 1/8" to 1 1/4"?
This type of paint is hard, tough, and resistant to abrasion and moisture penetration.
What is Enamel?