structure
The strength classification of fabrics used in aircraft covering is based on what?
Tensile Strength
The strength of fabric must be determined every 100hr or annual inspection. True/False
True
what is Warp
The direction along the length of fabric
aluminum pigment in dope is used primarily
to protect UV rays/light by reflecting them to prevent decay
moisture, mildew, chemicals, and acids have no effect on what type of fabric
Glass fabric
Cabin upholstery materials installed in current standard category airplanes must?
Be at least flame resistant
What type of cord is used to lace fabric to the wing ribs?
Round and Flat rib lacing cord
What is Ply
The number of yarns making up a thread
Which of the following is a hazard associated with sanding on fabric covered surfaces during the finishing process?
Static electricity buildup.
Fabric rejuvenator is used to
Fungicide and mildewicide additives are important for fabric coverd airfract, such as
Cotton and Linen
How many fabric thickness will be found in a French-fell seam?
Four
What is Bias
A cut, fold, or seam made diagonally to the Warp or fill threads
when and how is finishing tape applied on a fabric-covered aircraft
Doped on after the first or second coat of dope
the Determining factors of the selection of the correct weight of textile fabric to be used in covering any type of aircraft is the
Speed of the aircraft and the maximum wing loading
Fungicidal dopes are used in aircraft finishing as the
First coat to prevent fabric rotting and are applied thin enough to saturate the fabric
The best method of repair for a fabric-covered surface which has an L-shaped tear, each leg of which is approximately 14 inches long, is to
Sew with a baseball stitch from the center of the tear out toward the extremity of each leg and then dope on a patch
What reference tool is used to determine how the fiber is to be oriented for a particular ply of fabric
Warp clock
when dope-proofing the parts of the aircraft structure that come in contact with doped fabric, which of the following provide an acceptable protective coating?
Aluminum foil and cellulose tape
This spring loaded device is accepted by the FAA to measure fabric strength
what is a Maule tester
a common technique for replacing any large large area is to ???????????????
what is replace all fabric!!!!!!!!!!!!!!!!!!